City of Sacramento, CA
Sacramento, California, United States
THE POSITION The Equipment Mechanic III works closely with the Equipment Maintenance Supervisor in the daily operations as well as provides assistance and training to Mechanics in the Shop when complex repairs arise. IDEAL CANDIDATE STATEMENT The City of Sacramento Fleet Division is seeking an Equipment Mechanic III. The ideal Equipment Mechanic III candidate should be able to perform highly technical mechanical work on a wide variety of municipal equipment. The ideal candidate should also have experience working in a unionized workforce and training staff in a lead capacity or higher, while providing exceptional customer service. The ideal candidate should be goal-oriented, able to adapt to changing priorities, and able to communicate effectively. Under general supervision the Equipment Mechanic III performs and leads others in skilled journey level work in the mechanical repair and maintenance of light and heavy duty gasoline, diesel, alternative fueled vehicles and equipment, and other mechanical equipment; and to assign and schedule the work of an equipment maintenance shop; and to assign and schedule the work of an equipment maintenance shop or facility. SUPERVISION RECEIVED AND EXERCISED The class receives general supervision higher-level division personnel. Responsibilities include indirect supervision of other equipment maintenance personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES Depending upon assignment, duties may include, but are not limited to, the following: Schedule and set priorities for maintenance and repair work on City equipment. Make initial inspection on equipment to be repaired and diagnose defects. Generate work orders and evaluate repair work on its completion. Inspect, adjust and replace necessary parts such as: valves, pistons, main bearing assemblies and cooling, fuel and exhaust components and ignition systems. Perform highly technical work on hydraulic systems, fabrication projects, and rebuilding assignments. Order necessary parts, develop estimates and determine which supplier can meet needs. Assist in the supervision and training of subordinate personnel. Assign and schedule work of a fleet maintenance shop. Maintain records and write reports and memorandums. Coordinate maintenance and repairs with other City departments and divisions. Oversee compliance with work rules, safety, and environmental regulation. Provide exceptional customer service to those contacted in the course of work. Other related duties may also be performed; not all duties listed are necessarily performed by each individual in this classification. QUALIFICATIONS Knowledge of: Methods, materials, tools and techniques used in the repair and maintenance of a variety of municipal equipment. Operating principles of gasoline, diesel, and alternative fueled engines. Operating principles of light and heavy duty vehicles and mechanical equipment. Occupational hazards and standard safety precautions necessary in the work. Supervisory methods and training techniques. Electronic control systems typically found on modern automotive equipment. Ability to: Locate, correct and adjust defects in light and heavy duty vehicular and mechanical equipment. Schedule and set priorities for repairs and preventive maintenance to be accomplished. Adapt available tools and repair parts to specific repair problems. Order and identify parts necessary for repairs. Read and interpret and work from sketches, diagrams, and electrical schematics. Competently and safely operate and care for tools used in vehicle and mechanical equipment repair work. Supervise, evaluate, lead and train others in the equipment maintenance field. Lift up to 60 pounds. EXPERIENCE AND EDUCATION Experience: Five years of experience in the general maintenance, servicing, and repair of vehicles and equipment, including two years of experience on heavy duty gasoline and diesel driven equipment. Education: High school diploma or G.E.D. equivalent. Substitution: Successful completion of vocational education in the automotive, truck, or heavy equipment field may be substituted for up to two years of the work experience on a year-for-year basis. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Driver License: Possession of a valid California Class C Driver License is required at the time of appointment. Loss of the Class C License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. Ability to obtain a valid Class A Driver License during the probationary period. Individuals who fail to obtain the Class A License will not pass probation. Assessment: If considered for appointment, candidates must pass a pre-employment drug test. PROBATIONARY PERIOD: Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Equipment Mechanic III examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/19/2024 11:59 PM Pacific
Apr 29, 2024
Full Time
THE POSITION The Equipment Mechanic III works closely with the Equipment Maintenance Supervisor in the daily operations as well as provides assistance and training to Mechanics in the Shop when complex repairs arise. IDEAL CANDIDATE STATEMENT The City of Sacramento Fleet Division is seeking an Equipment Mechanic III. The ideal Equipment Mechanic III candidate should be able to perform highly technical mechanical work on a wide variety of municipal equipment. The ideal candidate should also have experience working in a unionized workforce and training staff in a lead capacity or higher, while providing exceptional customer service. The ideal candidate should be goal-oriented, able to adapt to changing priorities, and able to communicate effectively. Under general supervision the Equipment Mechanic III performs and leads others in skilled journey level work in the mechanical repair and maintenance of light and heavy duty gasoline, diesel, alternative fueled vehicles and equipment, and other mechanical equipment; and to assign and schedule the work of an equipment maintenance shop; and to assign and schedule the work of an equipment maintenance shop or facility. SUPERVISION RECEIVED AND EXERCISED The class receives general supervision higher-level division personnel. Responsibilities include indirect supervision of other equipment maintenance personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES Depending upon assignment, duties may include, but are not limited to, the following: Schedule and set priorities for maintenance and repair work on City equipment. Make initial inspection on equipment to be repaired and diagnose defects. Generate work orders and evaluate repair work on its completion. Inspect, adjust and replace necessary parts such as: valves, pistons, main bearing assemblies and cooling, fuel and exhaust components and ignition systems. Perform highly technical work on hydraulic systems, fabrication projects, and rebuilding assignments. Order necessary parts, develop estimates and determine which supplier can meet needs. Assist in the supervision and training of subordinate personnel. Assign and schedule work of a fleet maintenance shop. Maintain records and write reports and memorandums. Coordinate maintenance and repairs with other City departments and divisions. Oversee compliance with work rules, safety, and environmental regulation. Provide exceptional customer service to those contacted in the course of work. Other related duties may also be performed; not all duties listed are necessarily performed by each individual in this classification. QUALIFICATIONS Knowledge of: Methods, materials, tools and techniques used in the repair and maintenance of a variety of municipal equipment. Operating principles of gasoline, diesel, and alternative fueled engines. Operating principles of light and heavy duty vehicles and mechanical equipment. Occupational hazards and standard safety precautions necessary in the work. Supervisory methods and training techniques. Electronic control systems typically found on modern automotive equipment. Ability to: Locate, correct and adjust defects in light and heavy duty vehicular and mechanical equipment. Schedule and set priorities for repairs and preventive maintenance to be accomplished. Adapt available tools and repair parts to specific repair problems. Order and identify parts necessary for repairs. Read and interpret and work from sketches, diagrams, and electrical schematics. Competently and safely operate and care for tools used in vehicle and mechanical equipment repair work. Supervise, evaluate, lead and train others in the equipment maintenance field. Lift up to 60 pounds. EXPERIENCE AND EDUCATION Experience: Five years of experience in the general maintenance, servicing, and repair of vehicles and equipment, including two years of experience on heavy duty gasoline and diesel driven equipment. Education: High school diploma or G.E.D. equivalent. Substitution: Successful completion of vocational education in the automotive, truck, or heavy equipment field may be substituted for up to two years of the work experience on a year-for-year basis. PROOF OF EDUCATION Should education be used to qualify for this position, then proof of education such as, but not limited to, university/college transcripts and degrees should be submitted with your application and will be required at the time of appointment . Unofficial documents and/or copies are acceptable. An applicant with a college degree obtained outside the United States must have education records evaluated by a credentials evaluation service. Evaluation of education records will be due at time of appointment. SPECIAL QUALIFICATIONS Driver License: Possession of a valid California Class C Driver License is required at the time of appointment. Loss of the Class C License is cause for discipline. Individuals who do not meet this requirement due to physical disability will be reviewed on a case-by-case basis. Ability to obtain a valid Class A Driver License during the probationary period. Individuals who fail to obtain the Class A License will not pass probation. Assessment: If considered for appointment, candidates must pass a pre-employment drug test. PROBATIONARY PERIOD: Employees must complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE P lease note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently , including your spam and junk folders. All e-mail notifications can also be accessed through the governmentjobs.com applicant inbox. 1. Application: (Pass/Fail) - All applicants must complete and submit online a City of Sacramento employment application by the final filing deadline ; Employment applications must be submitted online; paper applications will not be accepted. Employment applications will be considered incomplete and will be disqualified: If applicants do not list current and/or past job-related experience in the duties area of the "Work Experience" section. Note: Qualifying experience is based on full-time experience (40 hours per week). Qualifying experience is calculated to the full-time equivalent (pro-rated if less than 40 hours/week ). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of education such as, but not limited to, university/college transcripts and degrees should be submitted online with your application. Proof of education will be required at time of appointment. Position/job titles will not be considered in determining eligibility for meeting the minimum qualifications for this position. If you’re requesting Veteran’s credit, a copy of your DD214 must be submitted online with your application or emailed to the Employment Office by the final filing deadline . Information regarding the use of Veteran’s credit can be found in the Civil Service Board rules under rule 4.9C. Applicants are responsible for attaching a copy of their DD214 to each position for which they apply. 2. Training and Experience Exam : (Weighted 100%) - The questions located at the end of the application are the Training and Experience (T&E) Exam. Responses to the T&E questions will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. The exam score will determine your ranking on the eligible list for this job. When completing the T&E questions, please note: Responses to the T&E questions must be submitted online; paper questionnaires will not be accepted. A resume will not substitute for the information required in the T&E questions. 3. Eligibility : Candidates who pass the Training and Experience Test will be placed on the eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list. Candidate’s eligibility expires one year from the date of notification of a passing score for the Equipment Mechanic III examination. 4. Screening Committee : (Pass/Fail)- All candidates that pass the examination and are in one of the top three ranks will have their application forwarded to the hiring department for review. The hiring department will select the most competitive applications for further consideration. Human Resources will only evaluate employment applications for the minimum qualifications, as stated on the job announcement, for applications selected by the hiring department. 5. Conditional Hire: Upon receipt of a conditional offer, the selected candidate must complete and pass Live Scan/fingerprinting. If applicable, candidates may also need to pass a pre-employment medical exam, controlled substance and/or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit https://www.governmentjobs.com/Home/ApplicationGuide for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at https://www.cityofsacramento.gov/HR/employment ; Send an email to employment@cityofsacramento.org ; or Call the Human Resources Department at (916) 808-5726 Bilingual Pay Did you know that the City offers bilingual pay? That's right, most labor agreements offer the option of providing employees with bilingual pay if the department deems it to be operationally necessary. Pension Reform Act The City of Sacramento is covered by the California Public Employees' Retirement System, and as such, must adhere to the California Public Employee's Pension Reform Act (PEPRA) of 2013. Please note that the provisions within this act may affect or impact an applicant's eligibility and/or selection for open vacancies at the City of Sacramento. Equal Opportunity Employer The City of Sacramento is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. Additional Information Civil Service Rules: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/CivilServiceBoardRules62012.pdf Union Contracts: https://www.cityofsacramento.gov/HR/labor-agreements.html Salary Schedule: https://www.cityofsacramento.gov/content/dam/portal/hr/documentlibrary/SalarySchedule.pdf Closing Date/Time: 5/19/2024 11:59 PM Pacific
YORK COUNTY, SC
Anna K. Hubbard Fire Training Center, South Carolina, United States
About us York County is located in the Piedmont region, between the Broad River and the Catawba River. Its diverse landscape is home to family-friendly towns/cities, a progressive urban region and lakefront communities. We are excited that you want to join our team and recognize that our employees are the foundation for our success. Mission Statement - York County provides quality public services in an open, efficient, and responsive manner. Vision Statement - York County provides an environment where all citizens and businesses can thrive and succeed. About our opportunity The York County Fire Services Department is excited to hire a full-time Fire Equipment Mechanic to join their team! The purpose of this position is to maintain York County's fleet of emergency fire apparatus vehicles and firefighting equipment to a high safety standard, as required by Federal Regulations, by performing preventative maintenance, testing, diagnostics and repairs. Projected Hiring Range: $24.18 - $30.22 per hour. Salary is based on qualifications. Work Schedule: Monday - Friday, 8:00 am -5:00 pm; hours may vary based on operational needs to include occasional evenings and weekends. Our Total Compensation Package: Compensation - competitive market-rate pay, and negotiable based on qualifications Comprehensive State Medical Insurance, Dental and Vision Insurance Life Insurance Long-term disability Deferred Compensation 401K Plans Health Savings Account (HSA) Public Loan Forgiveness Program (Student Loan Forgiveness Program) 11 Paid Holidays + 3 Optional Holidays Longevity Pay SC State Retirement Plan Pension Paid Vacation and Sick Time Sick Bank Critical Care and Cancer Insurance Wellness Screenings Employee Assistance Programs Professional Development / Trainings / Conferences Uniforms and all gear Duties and Responsibilities: Conducts diagnostics on "Meritor" Roll Stability Systems, "Class One" Vehicle Data Recorders, "V-Mux" Multiples electrical systems and exhaust gas regeneration Environmental Protection Association (EPA) Systems. Conducts diagnostics by use of Cummins Insite software, Allison Transmissions software, Meritor and Wabco Brake software, etc. utilizing a laptop and personal log on procedures. Performs minor and major repairs of fixed and portable Fire Pumps; conduct Underwriters Laboratories (UL) pump performance tests as required by National Fire Protection Association (NFPA) and Insurance Services Office (ISO). Properly and safely uses provided hand and power tools that includes cleaning, securing and ensuring required safeguards are in place. Performs minor and major repairs to heavy duty diesel and gasoline engines, heavy duty automatic transmissions and heavy-duty electrical components. Performs preventative maintenance such as changing oil and filters, lubricating, flushing cooling systems, replacing and adjusting brakes, replacing belts, etc. Ability to drive county vehicles required to perform this required task. Receives and processes work orders, ensuring prompt response to both routine and emergency maintenance and repair requests; assists in scheduling tasks according to priority. Constructs and assembles fire service grass units and service trucks using provided plans and drawings. Rebuilds and reconditions fire equipment as needed; Fire pumps, valves, hydraulic cylinders, PPV fans, chainsaws, generators, nozzles, fire hose, deluge guns, ladders, etc. Communicates extensively with OEMs to diagnose and repair specialized fire equipment components. Performs electrical wiring both AC and DC, currents for generators, breaker panels, outlet boxes, flood lights, warning lights and sirens, etc. Services, maintains and/or repairs fire service breathing air systems as required by Occupational Safety Health Association (OSHA) and National Fire Protection Association (NFPA). Performs related work as assigned. About you Education and Experience: High School Graduation or GED equivalent. Automotive Mechanic Associates degree is preferred. Three (3) years of fire apparatus and equipment experience or an equivalent combination of education, training and experience. Certifications and Licenses: Must possess a valid state Commercial Driver’s License (CDL) Class B driver's license with appropriate endorsements. A Class A is desired. Must possess and First Aid / CPR Certification and re-certify prior to expiration. Must possess Forklift Operators certification or the ability to obtain. A welding certification is desirable. Travel and Training: Numerous fire service-related training opportunities will be provided to gain specific manufacturer preferred training opportunities listed and at times may require (up to) air travel and extended stays out of state. Applicants with equivalent experience and/or education may be considered. Physical Demands / Work Environment / Disclaimer Physical Demands: Physical demands refer to the requirements for physical exertion and coordination of limb and body movement. Performs medium work that involves walking, standing, stooping, jumping, lifting, digging, pushing and raising objects and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis and 50 to 100 pounds of force on an occasional basis. Unavoidable Hazards (Work Environment): Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken. Involves routine and frequent exposure to: Bright/dim light; Dusts and pollen. Extreme heat and/or cold; Wet or humid conditions. Extreme noise levels, Animals/wildlife. Vibration; Fumes and/or noxious odors. Traffic; Moving machinery. Electrical shock; Heights. Radiation; Disease/pathogens. Americans with Disabilities Act Compliance: York County is an Equal Opportunity Employer. ADA requires the County to provide reasonable accommodations to qualified persons with disabilities. Prospective and current employees are encouraged to discuss ADA accommodations with management. Standard Clauses: May be required to work nights, weekends, holidays and emergencies (man-made or natural) to meet the business needs of the County. This job description is not designed to cover or contain a comprehensive listing of essential functions and responsibilities that are required of an employee for this job. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Full-time employees are allowed to participate in group medical, dental, vision, life and disability insurance programs offered by York County Government. If employees elect to secure dependent coverage, the employee should pay the additional costs for such coverage. All statements of insurance coverage are subject to the terms, conditions, restrictions and other eligibility requirements that are set forth in various insurance plan documents. Our full-time benefits through PEBA (South Carolina Retirement Systems and State Health Plan) include health insurance, prescription benefits, dental, vision, life insurance, MoneyPlus, Health Savings Accounts, retirement (Membership in the South Carolina Retirement System is mandatory for county employees), and deferred compensation.Making decisions about your insurance and retirement benefits can sometimes be complicated and difficult. The Navigating Your Benefits seriesprovides common-language explanations and can help you find your way in the world of your insurance and retirement benefits: Navigating Your Benefits | S.C. PEBA (sc.gov) Other full-time benefits include longevity allowance, annual leave, sick leave, holiday pay, Sick Leave Bank, wellness benefits, Employee Assistance Program, etc. Please contact Human Resources at Human.Resources@yorkcountygov.com if you would like more information. Longevity Allowance Full-time regular county employees, elected officials, appointed officials, and judges with ten or more years of full time continuous governmental service are eligible to receive a monthly longevity allowance in addition to their regular compensation. Continuous service transferred from employment with another county, municipality, state or a political entity created by the State may contribute toward eligibility for the longevity allowance. Longevity allowances are paid according to the following schedule. Longevity Allowance Years of Continuous Service Monthly Longevity Amount 10-14 Years $20.00 15-19 Years $25.00 20-24 Years $30.00 25-29 Years $35.00 30-34 Years $40.00 35-39 Years $45.00 40+ Years $50.00 Annual Leave Probationary and regular full-time county employees that work at least twenty (20) hours per week accrue annual leave with pay. Employees in their new hire six (6) month probationary period shall not be able to use annual leave until they become regular county employees. Employees who are separating from county service shall be paid for all accrued, unused annual leave up to 360 hours provided they give York County as the employer the proper notice as required. Employees in their six (6) month New Hire probationary period who are terminated or separated from employment shall not be paid for accrued annual leave. The maximum amount of annual leave carried into each calendar year is 360 hours. Earning Rate for Full-Time Employees Full-time employees with less than ten years of continuous service earn at the rate of eight hours of paid annual leave for each month of service during a twelve months period. Full-time employees with at least ten years, but less than twenty years of continuous service will earn at the rate of ten (10) hours of paid annual leave for each month of service during a twelve month period. Full-time employees with twenty or more years of service will earn at the rate of twelve (12) hours of paid annual leave for each month of service during a twelve (12) months period. Sick Leave Full-time county employees may be entitled to earn sick leave with pay. Employees may accrue up to 1,440 hours of sick leave. Upon termination of employment with the County, employees may not be reimbursed for any unused sick leave. When a paid holiday occurs while an employee is on sick leave with pay, the day may not be charged as sick leave. Earning Rate of Sick Leave Full time employees will earn eight hours of sick leave per month of service during a twelve month period. Paid Holiday’s The following days may be observed as paid holidays for York County Employees: January - December:3 Optional Holidays per Calendar Year January: New Year’s Day andMartin Luther King Day May: Memorial Day June: Juneteenth Day July: Independence Day September: Labor Day November: Veteran’s Day,Thanksgiving Day, andFriday after Thanksgiving December: Christmas Eve,Christmas Day Training: Quality training and educational programs are available at various times for county employees in order to support workforce development that is consistent with organizational objectives. Training topics may include driver training, CPR/first aid, communication, supervisor training, workplace violence, substance abuse, and various computer related classes. Closing Date/Time: 5/24/2024 5:00 PM Eastern
May 11, 2024
Full Time
About us York County is located in the Piedmont region, between the Broad River and the Catawba River. Its diverse landscape is home to family-friendly towns/cities, a progressive urban region and lakefront communities. We are excited that you want to join our team and recognize that our employees are the foundation for our success. Mission Statement - York County provides quality public services in an open, efficient, and responsive manner. Vision Statement - York County provides an environment where all citizens and businesses can thrive and succeed. About our opportunity The York County Fire Services Department is excited to hire a full-time Fire Equipment Mechanic to join their team! The purpose of this position is to maintain York County's fleet of emergency fire apparatus vehicles and firefighting equipment to a high safety standard, as required by Federal Regulations, by performing preventative maintenance, testing, diagnostics and repairs. Projected Hiring Range: $24.18 - $30.22 per hour. Salary is based on qualifications. Work Schedule: Monday - Friday, 8:00 am -5:00 pm; hours may vary based on operational needs to include occasional evenings and weekends. Our Total Compensation Package: Compensation - competitive market-rate pay, and negotiable based on qualifications Comprehensive State Medical Insurance, Dental and Vision Insurance Life Insurance Long-term disability Deferred Compensation 401K Plans Health Savings Account (HSA) Public Loan Forgiveness Program (Student Loan Forgiveness Program) 11 Paid Holidays + 3 Optional Holidays Longevity Pay SC State Retirement Plan Pension Paid Vacation and Sick Time Sick Bank Critical Care and Cancer Insurance Wellness Screenings Employee Assistance Programs Professional Development / Trainings / Conferences Uniforms and all gear Duties and Responsibilities: Conducts diagnostics on "Meritor" Roll Stability Systems, "Class One" Vehicle Data Recorders, "V-Mux" Multiples electrical systems and exhaust gas regeneration Environmental Protection Association (EPA) Systems. Conducts diagnostics by use of Cummins Insite software, Allison Transmissions software, Meritor and Wabco Brake software, etc. utilizing a laptop and personal log on procedures. Performs minor and major repairs of fixed and portable Fire Pumps; conduct Underwriters Laboratories (UL) pump performance tests as required by National Fire Protection Association (NFPA) and Insurance Services Office (ISO). Properly and safely uses provided hand and power tools that includes cleaning, securing and ensuring required safeguards are in place. Performs minor and major repairs to heavy duty diesel and gasoline engines, heavy duty automatic transmissions and heavy-duty electrical components. Performs preventative maintenance such as changing oil and filters, lubricating, flushing cooling systems, replacing and adjusting brakes, replacing belts, etc. Ability to drive county vehicles required to perform this required task. Receives and processes work orders, ensuring prompt response to both routine and emergency maintenance and repair requests; assists in scheduling tasks according to priority. Constructs and assembles fire service grass units and service trucks using provided plans and drawings. Rebuilds and reconditions fire equipment as needed; Fire pumps, valves, hydraulic cylinders, PPV fans, chainsaws, generators, nozzles, fire hose, deluge guns, ladders, etc. Communicates extensively with OEMs to diagnose and repair specialized fire equipment components. Performs electrical wiring both AC and DC, currents for generators, breaker panels, outlet boxes, flood lights, warning lights and sirens, etc. Services, maintains and/or repairs fire service breathing air systems as required by Occupational Safety Health Association (OSHA) and National Fire Protection Association (NFPA). Performs related work as assigned. About you Education and Experience: High School Graduation or GED equivalent. Automotive Mechanic Associates degree is preferred. Three (3) years of fire apparatus and equipment experience or an equivalent combination of education, training and experience. Certifications and Licenses: Must possess a valid state Commercial Driver’s License (CDL) Class B driver's license with appropriate endorsements. A Class A is desired. Must possess and First Aid / CPR Certification and re-certify prior to expiration. Must possess Forklift Operators certification or the ability to obtain. A welding certification is desirable. Travel and Training: Numerous fire service-related training opportunities will be provided to gain specific manufacturer preferred training opportunities listed and at times may require (up to) air travel and extended stays out of state. Applicants with equivalent experience and/or education may be considered. Physical Demands / Work Environment / Disclaimer Physical Demands: Physical demands refer to the requirements for physical exertion and coordination of limb and body movement. Performs medium work that involves walking, standing, stooping, jumping, lifting, digging, pushing and raising objects and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis and 50 to 100 pounds of force on an occasional basis. Unavoidable Hazards (Work Environment): Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken. Involves routine and frequent exposure to: Bright/dim light; Dusts and pollen. Extreme heat and/or cold; Wet or humid conditions. Extreme noise levels, Animals/wildlife. Vibration; Fumes and/or noxious odors. Traffic; Moving machinery. Electrical shock; Heights. Radiation; Disease/pathogens. Americans with Disabilities Act Compliance: York County is an Equal Opportunity Employer. ADA requires the County to provide reasonable accommodations to qualified persons with disabilities. Prospective and current employees are encouraged to discuss ADA accommodations with management. Standard Clauses: May be required to work nights, weekends, holidays and emergencies (man-made or natural) to meet the business needs of the County. This job description is not designed to cover or contain a comprehensive listing of essential functions and responsibilities that are required of an employee for this job. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Full-time employees are allowed to participate in group medical, dental, vision, life and disability insurance programs offered by York County Government. If employees elect to secure dependent coverage, the employee should pay the additional costs for such coverage. All statements of insurance coverage are subject to the terms, conditions, restrictions and other eligibility requirements that are set forth in various insurance plan documents. Our full-time benefits through PEBA (South Carolina Retirement Systems and State Health Plan) include health insurance, prescription benefits, dental, vision, life insurance, MoneyPlus, Health Savings Accounts, retirement (Membership in the South Carolina Retirement System is mandatory for county employees), and deferred compensation.Making decisions about your insurance and retirement benefits can sometimes be complicated and difficult. The Navigating Your Benefits seriesprovides common-language explanations and can help you find your way in the world of your insurance and retirement benefits: Navigating Your Benefits | S.C. PEBA (sc.gov) Other full-time benefits include longevity allowance, annual leave, sick leave, holiday pay, Sick Leave Bank, wellness benefits, Employee Assistance Program, etc. Please contact Human Resources at Human.Resources@yorkcountygov.com if you would like more information. Longevity Allowance Full-time regular county employees, elected officials, appointed officials, and judges with ten or more years of full time continuous governmental service are eligible to receive a monthly longevity allowance in addition to their regular compensation. Continuous service transferred from employment with another county, municipality, state or a political entity created by the State may contribute toward eligibility for the longevity allowance. Longevity allowances are paid according to the following schedule. Longevity Allowance Years of Continuous Service Monthly Longevity Amount 10-14 Years $20.00 15-19 Years $25.00 20-24 Years $30.00 25-29 Years $35.00 30-34 Years $40.00 35-39 Years $45.00 40+ Years $50.00 Annual Leave Probationary and regular full-time county employees that work at least twenty (20) hours per week accrue annual leave with pay. Employees in their new hire six (6) month probationary period shall not be able to use annual leave until they become regular county employees. Employees who are separating from county service shall be paid for all accrued, unused annual leave up to 360 hours provided they give York County as the employer the proper notice as required. Employees in their six (6) month New Hire probationary period who are terminated or separated from employment shall not be paid for accrued annual leave. The maximum amount of annual leave carried into each calendar year is 360 hours. Earning Rate for Full-Time Employees Full-time employees with less than ten years of continuous service earn at the rate of eight hours of paid annual leave for each month of service during a twelve months period. Full-time employees with at least ten years, but less than twenty years of continuous service will earn at the rate of ten (10) hours of paid annual leave for each month of service during a twelve month period. Full-time employees with twenty or more years of service will earn at the rate of twelve (12) hours of paid annual leave for each month of service during a twelve (12) months period. Sick Leave Full-time county employees may be entitled to earn sick leave with pay. Employees may accrue up to 1,440 hours of sick leave. Upon termination of employment with the County, employees may not be reimbursed for any unused sick leave. When a paid holiday occurs while an employee is on sick leave with pay, the day may not be charged as sick leave. Earning Rate of Sick Leave Full time employees will earn eight hours of sick leave per month of service during a twelve month period. Paid Holiday’s The following days may be observed as paid holidays for York County Employees: January - December:3 Optional Holidays per Calendar Year January: New Year’s Day andMartin Luther King Day May: Memorial Day June: Juneteenth Day July: Independence Day September: Labor Day November: Veteran’s Day,Thanksgiving Day, andFriday after Thanksgiving December: Christmas Eve,Christmas Day Training: Quality training and educational programs are available at various times for county employees in order to support workforce development that is consistent with organizational objectives. Training topics may include driver training, CPR/first aid, communication, supervisor training, workplace violence, substance abuse, and various computer related classes. Closing Date/Time: 5/24/2024 5:00 PM Eastern
Announcement Number: 46624 Open to all qualified persons. Posted 03/15/2024 Recruiter: KELLY NIETO Phone: (775)888-1519 Email: knieto@dot.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Highway Equipment Mechanics maintain, repair, and modify medium (GVWR 10,500-26,000 lbs.) and heavy (GVWR greater than 26,000 lbs.) highway maintenance and construction equipment. Incumbents possess a degree of knowledge and proficiency sufficient to perform work independently with little or no additional training. This position is located within Elko/ Wells. Incumbents diagnose, maintain, modify, and repair Nevada Department of Transportation (NDOT) equipment and are responsible for keeping equipment in the District's fleet in good repair for routine highway maintenance and emergency response. This includes a variety of light, medium, and heavy equipment. Repairs include, but are not limited to, engine repair or replacement, repairing and rebuilding brake systems, steering and suspension system components, differential and drive line components, servicing of automatic and manual transmissions, electrical and wiring systems. Duties also include repairing, maintaining, fabricating, and installing parts, components, and special use items. Keeping the fleet in safe operating condition is critical to daily operations, and in effectively preserving and managing our assets. NOTE: THIS POSITION WILL BE UTILIZED FOR SEASONAL SPRING EMPLOYMENT. FOR ALL FUTURE HWY EQUIPMENT MECHANIC 1 POSITIONS, YOU MUST REAPPLY UNDER THE NEW RECRUITMENT. APPLICANTS MUST BE 18 YEARS OF AGE OR OLDER. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of a recognized automotive/equipment repair apprenticeship program; OR completion of the Equipment Mechanic-in-Training program in Nevada State service; OR an equivalent combination of education and experience as described above. Special Requirements Incumbent is required to furnish their own mechanic's tools. Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. In addition, federal law requires random testing for controlled substances during employment. A valid drivers license is required at the time of appointment and as a condition of continuing employment. Additional Position Criteria These positions require an applicant be at least 18 years of age upon application. If selected, proof of being at least 18 years of age will be required. This announcement is for temporary (maximum of six months) positions only. Applicant must indicate that they are willing to accept temporary work in order to be considered. This position may require working alternate shifts and outside of traditional business hours. The hours of this position are subject to change based on the needs of the appointing authority. Typical shifts are four 10-hour or five 8-hour shifts, but may include some variation depending on the specific needs of the department. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. The following additional questions are part of this Recruitment 1) This announcement is for temporary (maximum of six months) positions only and does not lead to permanent employment. Applicant must indicate that they are willing to accept temporary work in order to be considered. Are you willing to accept temporary work? 2) Please select what location you are willing to work at: Elko or Wells. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
Mar 16, 2024
Temporary
Announcement Number: 46624 Open to all qualified persons. Posted 03/15/2024 Recruiter: KELLY NIETO Phone: (775)888-1519 Email: knieto@dot.nv.gov Applications accepted until recruitment needs are satisfied ** Qualified individuals are encouraged to apply immediately. Lists of eligible candidates will be established and hiring may occur early in the recruiting process. Recruitment will close without notice when a sufficient number of applications are received or a hiring decision has been made. The Position Highway Equipment Mechanics maintain, repair, and modify medium (GVWR 10,500-26,000 lbs.) and heavy (GVWR greater than 26,000 lbs.) highway maintenance and construction equipment. Incumbents possess a degree of knowledge and proficiency sufficient to perform work independently with little or no additional training. This position is located within Elko/ Wells. Incumbents diagnose, maintain, modify, and repair Nevada Department of Transportation (NDOT) equipment and are responsible for keeping equipment in the District's fleet in good repair for routine highway maintenance and emergency response. This includes a variety of light, medium, and heavy equipment. Repairs include, but are not limited to, engine repair or replacement, repairing and rebuilding brake systems, steering and suspension system components, differential and drive line components, servicing of automatic and manual transmissions, electrical and wiring systems. Duties also include repairing, maintaining, fabricating, and installing parts, components, and special use items. Keeping the fleet in safe operating condition is critical to daily operations, and in effectively preserving and managing our assets. NOTE: THIS POSITION WILL BE UTILIZED FOR SEASONAL SPRING EMPLOYMENT. FOR ALL FUTURE HWY EQUIPMENT MECHANIC 1 POSITIONS, YOU MUST REAPPLY UNDER THE NEW RECRUITMENT. APPLICANTS MUST BE 18 YEARS OF AGE OR OLDER. The State of Nevada is an equal opportunity employer dedicated to building diverse, inclusive, and innovative work environments with employees who reflect our communities and enthusiastically serve them. All applicants are considered without regard to race, color, national origin, religion or belief, age, disability, sex, sexual orientation, gender identity or expression, pregnancy, domestic partnership, genetic information (GINA), or compensation and/or wages. *** THIS RECRUITMENT MAY CLOSE WITHOUT FURTHER NOTICE DEPENDING ON THE NUMBER OF APPLICATIONS RECEIVED. APPLICANTS ARE ENCOURAGED TO APPLY AS SOON AS POSSIBLE*** To see full Class Specifications visit: http://hr.nv.gov/Resources/ClassSpecs/Class_Specifications-9_0/ To Qualify: In order to be qualified, you must meet the following requirements: Education and Experience (Minimum Qualifications) Completion of a recognized automotive/equipment repair apprenticeship program; OR completion of the Equipment Mechanic-in-Training program in Nevada State service; OR an equivalent combination of education and experience as described above. Special Requirements Incumbent is required to furnish their own mechanic's tools. Pursuant to NRS 284.4066, this position has been identified as affecting public safety. Persons offered employment in this position must submit to a pre-employment screening for controlled substances. In addition, federal law requires random testing for controlled substances during employment. A valid drivers license is required at the time of appointment and as a condition of continuing employment. Additional Position Criteria These positions require an applicant be at least 18 years of age upon application. If selected, proof of being at least 18 years of age will be required. This announcement is for temporary (maximum of six months) positions only. Applicant must indicate that they are willing to accept temporary work in order to be considered. This position may require working alternate shifts and outside of traditional business hours. The hours of this position are subject to change based on the needs of the appointing authority. Typical shifts are four 10-hour or five 8-hour shifts, but may include some variation depending on the specific needs of the department. The Examination Application Evaluation Exam The exam will consist of an application evaluation. It is essential that applications include detailed information with time frames regarding education and experience. The most qualified applicants will be contacted by the hiring agency for interview. The hiring agency may require specific skills related testing as part of the interviewing process. The following additional questions are part of this Recruitment 1) This announcement is for temporary (maximum of six months) positions only and does not lead to permanent employment. Applicant must indicate that they are willing to accept temporary work in order to be considered. Are you willing to accept temporary work? 2) Please select what location you are willing to work at: Elko or Wells. INFORMATIONAL LINKS For more information about state employment, visit the following: Division of Human Resource Management: http://hr.nv.gov Public Employees Retirement System: http://www.nvpers.org Public Employees Benefits Program: http://pebp.state.nv.us More Benefits Information: http://nvjobs.nv.gov/Applicants/EB REFER A FRIEND Help us reach qualified candidates! Refer a friend by clicking here: Email Direct Inquiries or Correspondence to: Division of Human Resource Management Northern Nevada 515 East Musser Street, First Floor Carson City, Nevada 89701-4204
CITY OF BUENA PARK, CA
Buena Park, California, United States
JOB BULLETIN Salary effective June 22, 2024 $30.33 - $38.40 hourly $5,257 - $6656 monthly $63,086 - $79,872 yearly Are you an experienced Fleet Mechanic with a background in municipal government? The City of Buena Park Fleet Maintenance Division is seeking a Fleet Mechanic with prior city experience to join the team. The Fleet Mechanic maintains and repairs City vehicles, trucks, tractors and other light and heavy power-driven equipment. The ideal candidate for this position is a hardworking team-oriented individual who is eager to learn, takes ownership, initiative, and accountability for their work, and possesses specialized knowledge of equipment maintenance procedures and use of diagnostic equipment. If this sounds like you, APPLY TODAY! GENERAL PURPOSE Under general supervision, performs skilled and semi-skilled diagnostic, repair, and maintenance work on a variety of automotive vehicles, trucks, tractors, and other light and heavy power-driven equipment; and does related work as required. DISTINGUISHING CHARACTERISTICS The Fleet Mechanic is distinguished from the general maintenance workers by its specialized knowledge of equipment maintenance procedures and use of diagnostic equipment. The Fleet Mechanic is differentiated from the Lead Fleet Mechanic which has additional responsibility for organizing daily service orders, assigning and completing the more difficult tasks, checking the work of employees, and coordinating outside repair work and parts orders with vendors and contractors. ESSENTIAL FUNCTIONS The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the class. Inspects, diagnoses, and locates technical and electrical malfunctions on city automobiles, trucks, and a variety of maintenance and construction equipment and related component systems, including alternative fuel/hybrid systems. Overhauls, repairs, maintains and adjusts a wide variety of gas and diesel-powered automotive, truck, and heavy equipment and their component and computerized systems, including, but not limited to, engines, transmissions, hydraulic or air brakes, clutches, differentials, fuel systems, generators, ignition systems, distributors and pumps, hydraulic systems, power plants, charging systems, power trains, heating and air conditioning units, and other components and units. Operates and maintains a complete set of hand, power, and shop tools and computerized diagnostic and test equipment used in the automotive and truck repair trade. Performs general maintenance services and repairs on cars, trucks and other equipment, including, but not limited to, grease and lubrication, battery service, tire change and repair, replacement of spark plugs, light bulbs, fan belts and other parts, gas and oil service, washing and cleaning of exteriors and interiors of vehicles, and other standard vehicle maintenance duties. Reads and interprets schematics, shop manuals, and other related materials in order to perform work assignments and to stay abreast of the current technology; access technical information from automated databases and technical manuals. Fabricates and modifies parts, equipment, and vehicles as required by the user department. Performs welding, braising, soldering, and cutting operations. Picks up and delivers vehicles and needed parts and supplies. Completes basic work records and material logs. Follows safe working practices; maintains a clean and orderly work and shop area. QUALIFICATIONS GUIDELINES Knowledge of: Practices, techniques, materials, tools and equipment used in the diagnosis, repair and modification of a wide variety of technical equipment, including automobiles, trucks, and heavy equipment, and their component systems; preventive maintenance practices and techniques; regulations, standards and guidelines pertaining to the work; current technology in repairing and diagnosing vehicles, equipment and their component systems; operation and repair characteristics of the entire range of city-owned light and heavy equipment; welding techniques and methods; effective customer service techniques. Ability to: Inspect and correctly diagnose malfunctions in gas and diesel-powered equipment; use tools and test equipment associated with the automotive and heavy equipment trade; use gas and electric welding and cutting apparatus; perform technical repairs and adjustments within the time frames established; perform preventative maintenance and replacement functions; read and interpret manuals, schematics, plans, and specifications; prepare and maintain a variety of shop time keeping and repair records; communicate effectively, both orally and in writing; understand and follow oral and written instructions; establish and maintain effective working relationships with co-workers, management, vendors, and the general public. PHYSICAL AND MENTAL DEMANDS The physical and mental demands described here are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands While performing the duties of this class, employees are regularly required to use hands to finger, handle, feel or operate objects, tools, or controls and reach above and below shoulder level with hands and arms. Employees are required to frequently stand and walk in work areas and occasionally sit while completing records and reports, and talk and hear. Employees are expected to stoop, squat, crawl, lie on their backs while facing upward, and work within confined physical spaces. Employees may climb stairs or small stools, and lift and carry parts and equipment typically weighing less than 50 pounds. Specific vision abilities required by this class include close vision, color vision, and the ability to adjust focus. Mental Demands While performing the duties of this class, an employee is regularly required to use oral and written communication skills; read and interpret documents; analyze and solve basic problems; use math and mathematical reasoning; observe and interpret situations; learn and apply new information or new skills; and interacts with co-workers, management, contractors, vendors, and the public. ENVIRONMENTAL DEMANDS The employee works indoors and outdoors while assessing and working on fleet equipment. The employee is exposed to alternating coldness, heat, dust, oils, greases, fumes, moisture, wetness, and various cleaning agents. Employees must periodically pick up, deliver, and test-drive equipment. The noise level is loud when employees are operating power tools and equipment. EDUCATION/TRAINING/EXPERIENCE High School graduation or G.E.D. equivalent AND two years of experience performing diagnostic and repair duties on a wide variety of vehicles and equipment, including diesel, gas-powered equipment and their component electronic and computerized systems is required. LICENSES/CERTIFICATES/SPECIAL REQUIREMENTS Valid Class C California driver license, an acceptable driving record, and evidence of insurance are required. Class B California commercial learners permit is required upon hire and Class B California driver license is required within one year of appointment to this position. National Institute of Automotive Service Excellence (ASE) A6 Electrical/Electronic Systems and/or A8 Engine Performance certification is highly desirable. APPLICANT INFORMATION/EXAM WEIGHT Tentative Testing Schedule Written Exam: June 13, 2024 Oral Exam: June 20, 2024 Applicants must submit a City application online through the Human Resources Department web page at www.buenapark.com/hr . Applications may be accompanied by a resume describing experience, education, and training in relation to the requirements of the position, however, resumes will not be accepted in lieu of a completed City employment application. All applications will be reviewed and only those candidates determined to be most qualified on the basis of experience and education, as submitted, will be invited to participate in the selection process. The selection process may include but is not limited to an oral interview and/or written exams and oral presentations. Successful candidates will be placed on the employment eligible list from which hires may be made. An eligible list is valid for up to one year unless exhausted sooner. The City of Buena Park is an Equal Opportunity employer and does not discriminate on the basis of race, color, creed, ancestry, national origin, gender, marital status, sexual orientation, religion, age, veteran status or disability. Americans with Disabilities: Applicants with disabilities who require special testing arrangements must contact Human Resources. If you have a disability for which you require an accommodation, please contact Human Resources at (714) 562-3515 no later than 5 business days before the test date. Fingerprinting: Applicants who are selected for hire are fingerprinted during the pre-placement processing period. All fingerprints will be processed with the Department of Justice to verify criminal records or absence thereof. Physical Examination: Employment offers are conditional based, upon the successful completion of a medical examination which may include drug and alcohol screening. Physicals are performed by the City's designated physician at the City's expense. Below is a list of key benefits offered to employees of the City of Buena Park and is only a summary of benefits. They are not intended to replace or modify the legal plan documents on file in the Human Resources Department. SALARY RANGE: Composed of six (6) steps - Entry step through E step (Except management positions). Each step represents an increase of approximately five (5) percent. RETIREMENT: Provided through California Public Employees' Retirement System (CalPERS). Employee pays member contribution. VACATION: Earned at the rate of ten (10) working days per year for the first five (5) years of service. Public safety employees receive a different but equivalent benefit. Additional vacation may be earned by employees after five (5) years of service. SICK LEAVE: Accumulated on the basis of eight (8) hours per month with no maximum accumulation. HOLIDAYS: An average of eleven (11) holidays per year. MEDICAL INSURANCE: Several plans (indemnity and HMO's) are available. The City pays a flat rate portion of the premium according to the bargaining unit agreement. DENTAL INSURANCE: Three (3) plans are available. The City pays a flat rate portion of the premium. The Employee may pay a portion of the insurance premium according at bargaining unit agreement and this benefit is voluntary. VISION INSURANCE: One plan is available. The Employee pays the insurance premium and this benefit is voluntary. LIFE INSURANCE: Amount of coverage is based on the employee bargaining unit. Premiums are fully paid by the City. LONG TERM DISABILITY: Fully paid by the City. Police sworn personnel are not eligible. EMPLOYEE ASSISTANCE PROGRAM: Available to all City employees and their immediate families. DEFERRED COMPENSATION PLAN: The City offersone (1) plan administered by Nationwide Retirement Solutions. This is a voluntary benefit with no City contribution. WORK SCHEDULE: 9/80, 4/10 or 3/12 alternative work schedule depending upon the work location. OC CREDIT UNION: Available to all City employees and their families. Closing Date/Time: 6/4/2024 11:59 PM Pacific
May 09, 2024
Full Time
JOB BULLETIN Salary effective June 22, 2024 $30.33 - $38.40 hourly $5,257 - $6656 monthly $63,086 - $79,872 yearly Are you an experienced Fleet Mechanic with a background in municipal government? The City of Buena Park Fleet Maintenance Division is seeking a Fleet Mechanic with prior city experience to join the team. The Fleet Mechanic maintains and repairs City vehicles, trucks, tractors and other light and heavy power-driven equipment. The ideal candidate for this position is a hardworking team-oriented individual who is eager to learn, takes ownership, initiative, and accountability for their work, and possesses specialized knowledge of equipment maintenance procedures and use of diagnostic equipment. If this sounds like you, APPLY TODAY! GENERAL PURPOSE Under general supervision, performs skilled and semi-skilled diagnostic, repair, and maintenance work on a variety of automotive vehicles, trucks, tractors, and other light and heavy power-driven equipment; and does related work as required. DISTINGUISHING CHARACTERISTICS The Fleet Mechanic is distinguished from the general maintenance workers by its specialized knowledge of equipment maintenance procedures and use of diagnostic equipment. The Fleet Mechanic is differentiated from the Lead Fleet Mechanic which has additional responsibility for organizing daily service orders, assigning and completing the more difficult tasks, checking the work of employees, and coordinating outside repair work and parts orders with vendors and contractors. ESSENTIAL FUNCTIONS The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the class. Inspects, diagnoses, and locates technical and electrical malfunctions on city automobiles, trucks, and a variety of maintenance and construction equipment and related component systems, including alternative fuel/hybrid systems. Overhauls, repairs, maintains and adjusts a wide variety of gas and diesel-powered automotive, truck, and heavy equipment and their component and computerized systems, including, but not limited to, engines, transmissions, hydraulic or air brakes, clutches, differentials, fuel systems, generators, ignition systems, distributors and pumps, hydraulic systems, power plants, charging systems, power trains, heating and air conditioning units, and other components and units. Operates and maintains a complete set of hand, power, and shop tools and computerized diagnostic and test equipment used in the automotive and truck repair trade. Performs general maintenance services and repairs on cars, trucks and other equipment, including, but not limited to, grease and lubrication, battery service, tire change and repair, replacement of spark plugs, light bulbs, fan belts and other parts, gas and oil service, washing and cleaning of exteriors and interiors of vehicles, and other standard vehicle maintenance duties. Reads and interprets schematics, shop manuals, and other related materials in order to perform work assignments and to stay abreast of the current technology; access technical information from automated databases and technical manuals. Fabricates and modifies parts, equipment, and vehicles as required by the user department. Performs welding, braising, soldering, and cutting operations. Picks up and delivers vehicles and needed parts and supplies. Completes basic work records and material logs. Follows safe working practices; maintains a clean and orderly work and shop area. QUALIFICATIONS GUIDELINES Knowledge of: Practices, techniques, materials, tools and equipment used in the diagnosis, repair and modification of a wide variety of technical equipment, including automobiles, trucks, and heavy equipment, and their component systems; preventive maintenance practices and techniques; regulations, standards and guidelines pertaining to the work; current technology in repairing and diagnosing vehicles, equipment and their component systems; operation and repair characteristics of the entire range of city-owned light and heavy equipment; welding techniques and methods; effective customer service techniques. Ability to: Inspect and correctly diagnose malfunctions in gas and diesel-powered equipment; use tools and test equipment associated with the automotive and heavy equipment trade; use gas and electric welding and cutting apparatus; perform technical repairs and adjustments within the time frames established; perform preventative maintenance and replacement functions; read and interpret manuals, schematics, plans, and specifications; prepare and maintain a variety of shop time keeping and repair records; communicate effectively, both orally and in writing; understand and follow oral and written instructions; establish and maintain effective working relationships with co-workers, management, vendors, and the general public. PHYSICAL AND MENTAL DEMANDS The physical and mental demands described here are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands While performing the duties of this class, employees are regularly required to use hands to finger, handle, feel or operate objects, tools, or controls and reach above and below shoulder level with hands and arms. Employees are required to frequently stand and walk in work areas and occasionally sit while completing records and reports, and talk and hear. Employees are expected to stoop, squat, crawl, lie on their backs while facing upward, and work within confined physical spaces. Employees may climb stairs or small stools, and lift and carry parts and equipment typically weighing less than 50 pounds. Specific vision abilities required by this class include close vision, color vision, and the ability to adjust focus. Mental Demands While performing the duties of this class, an employee is regularly required to use oral and written communication skills; read and interpret documents; analyze and solve basic problems; use math and mathematical reasoning; observe and interpret situations; learn and apply new information or new skills; and interacts with co-workers, management, contractors, vendors, and the public. ENVIRONMENTAL DEMANDS The employee works indoors and outdoors while assessing and working on fleet equipment. The employee is exposed to alternating coldness, heat, dust, oils, greases, fumes, moisture, wetness, and various cleaning agents. Employees must periodically pick up, deliver, and test-drive equipment. The noise level is loud when employees are operating power tools and equipment. EDUCATION/TRAINING/EXPERIENCE High School graduation or G.E.D. equivalent AND two years of experience performing diagnostic and repair duties on a wide variety of vehicles and equipment, including diesel, gas-powered equipment and their component electronic and computerized systems is required. LICENSES/CERTIFICATES/SPECIAL REQUIREMENTS Valid Class C California driver license, an acceptable driving record, and evidence of insurance are required. Class B California commercial learners permit is required upon hire and Class B California driver license is required within one year of appointment to this position. National Institute of Automotive Service Excellence (ASE) A6 Electrical/Electronic Systems and/or A8 Engine Performance certification is highly desirable. APPLICANT INFORMATION/EXAM WEIGHT Tentative Testing Schedule Written Exam: June 13, 2024 Oral Exam: June 20, 2024 Applicants must submit a City application online through the Human Resources Department web page at www.buenapark.com/hr . Applications may be accompanied by a resume describing experience, education, and training in relation to the requirements of the position, however, resumes will not be accepted in lieu of a completed City employment application. All applications will be reviewed and only those candidates determined to be most qualified on the basis of experience and education, as submitted, will be invited to participate in the selection process. The selection process may include but is not limited to an oral interview and/or written exams and oral presentations. Successful candidates will be placed on the employment eligible list from which hires may be made. An eligible list is valid for up to one year unless exhausted sooner. The City of Buena Park is an Equal Opportunity employer and does not discriminate on the basis of race, color, creed, ancestry, national origin, gender, marital status, sexual orientation, religion, age, veteran status or disability. Americans with Disabilities: Applicants with disabilities who require special testing arrangements must contact Human Resources. If you have a disability for which you require an accommodation, please contact Human Resources at (714) 562-3515 no later than 5 business days before the test date. Fingerprinting: Applicants who are selected for hire are fingerprinted during the pre-placement processing period. All fingerprints will be processed with the Department of Justice to verify criminal records or absence thereof. Physical Examination: Employment offers are conditional based, upon the successful completion of a medical examination which may include drug and alcohol screening. Physicals are performed by the City's designated physician at the City's expense. Below is a list of key benefits offered to employees of the City of Buena Park and is only a summary of benefits. They are not intended to replace or modify the legal plan documents on file in the Human Resources Department. SALARY RANGE: Composed of six (6) steps - Entry step through E step (Except management positions). Each step represents an increase of approximately five (5) percent. RETIREMENT: Provided through California Public Employees' Retirement System (CalPERS). Employee pays member contribution. VACATION: Earned at the rate of ten (10) working days per year for the first five (5) years of service. Public safety employees receive a different but equivalent benefit. Additional vacation may be earned by employees after five (5) years of service. SICK LEAVE: Accumulated on the basis of eight (8) hours per month with no maximum accumulation. HOLIDAYS: An average of eleven (11) holidays per year. MEDICAL INSURANCE: Several plans (indemnity and HMO's) are available. The City pays a flat rate portion of the premium according to the bargaining unit agreement. DENTAL INSURANCE: Three (3) plans are available. The City pays a flat rate portion of the premium. The Employee may pay a portion of the insurance premium according at bargaining unit agreement and this benefit is voluntary. VISION INSURANCE: One plan is available. The Employee pays the insurance premium and this benefit is voluntary. LIFE INSURANCE: Amount of coverage is based on the employee bargaining unit. Premiums are fully paid by the City. LONG TERM DISABILITY: Fully paid by the City. Police sworn personnel are not eligible. EMPLOYEE ASSISTANCE PROGRAM: Available to all City employees and their immediate families. DEFERRED COMPENSATION PLAN: The City offersone (1) plan administered by Nationwide Retirement Solutions. This is a voluntary benefit with no City contribution. WORK SCHEDULE: 9/80, 4/10 or 3/12 alternative work schedule depending upon the work location. OC CREDIT UNION: Available to all City employees and their families. Closing Date/Time: 6/4/2024 11:59 PM Pacific
Cal State University (CSU) East Bay
25800 Carlos Bee Boulevard, Hayward, CA 94542, USA
Salary and Benefits PLEASE NOTE: The starting salary placement depends on qualifications and experience and is anticipated to be in the range of $6,464.00 per month to $8,196.00 per month. Cal State East Bay offers a broad range of benefits that includes medical, dental, vision, retirement (CalPERS), 401k, 457, 403(b), dependent and health care reimbursement accounts, life insurance, vacation and sick, 14 paid holidays, one personal holiday and tuition fee waiver. For more information on the benefits program, please visit our benefits website. The CSU Total Compensation Calculator demonstrates the significance of our benefits package. Classification Air Conditioning and Refrigeration Mechanic About Cal State East Bay Cal State East Bay's beautiful main campus is located in the Hayward hills with panoramic views of the San Francisco Bay shoreline. Situated above the city of Hayward, the campus offers an ideal setting for teaching and learning and yet easy access to the many cities along the bay. The University has a satellite campus in Concord, a professional development center in Oakland and a significant presence online. Founded in 1957, Cal State East Bay is one of 23 universities of the California State University system (CSU). Cal State East Bay is recognized as a regionally engaged and globally oriented university with a strong commitment to academic innovation, student success, engaged and service learning, diversity, and sustainability. About the Position The Air Conditioning and Refrigeration Mechanic is distinguished from other classifications in the series by responsibility for the full range of service, maintenance and repair on more complex refrigeration and associated HVAC systems and equipment. The work of an Air Conditioning and Refrigeration Mechanic requires a comprehensive knowledge of refrigeration and air conditioning systems. Incumbents in this classification must be thoroughly familiar with all safety codes and regulations related to the installation and operation of refrigeration and air conditioning systems. Positions in this classification require certification from the Environmental Protection Agency in the use and disposal of compressed refrigerants. Under general direction, incumbents install, troubleshoot, calibrate, service, repair and maintain refrigeration and HVAC systems, equipment, instruments and controls using electrical, electronic, pneumatic or digitally controlled systems; oil, clean, adjust, overhaul, and repair motors, condensers, compressors, oil and vacuum pumps, and similar equipment; perform major overhauls involving disassembly and inspection of all parts, replacement of defective and worn parts, reassembly of equipment instruments and/or controls, and the testing of equipment to ensure proper functioning; locate and diagnose malfunctions using a wide variety of test equipment and instruments; analyze the efficiency of campus refrigeration and air conditioning systems and recommend action for improvement; respond to service requests; diagnose problems in the distribution of air to individual rooms and buildings and make necessary adjustments; use building automation system to diagnose and troubleshoot problems in HVAC and refrigeration systems; maintain inventory and records; order parts and supplies; and train and provide work direction to skilled and semi-skilled workers. Responsibilities Performs at journey level in the installation, repair and operation of campus air conditioning/refrigeration systems, including: Repairs complex refrigeration and HVAC Systems Comprehensive knowledge of air conditioning and refrigeration systems troubleshooting techniques and understanding Thorough understanding of programmable logic Diagnose system malfunctions Calibrate system instruments and controls Analyze systems to maintain proper operation Overhaul Systems as necessary Repair/adjust sealed systems as necessary Replacement of failed components and parts Disassembly and inspection of systems Perform sealed system leak checks Testing of repaired equipment and systems Utilize campus BMS & CMMS systems Performs the additional tasks as required: Cleaning of condensers and evaporators Replacement of filters Replacement of belts Order parts and supplies as necessary Equipment record keeping Maintain inventory Maintain specialized test equipment and tools Support team projects and work as needed Respond to service calls Training: Asbestos O&M Lead Training Aerial/Scissor Lift Training Departmental Meetings Confined Space Attend mandatory tailgate meetings Mandatory CSU/Cal State East Bay trainings Staying abreast of new methods and technology Timekeeping/Reports: Order materials using the department MSR form Shop Clean-up Daily time card submission Vacation and overtime forms submission Campus refrigerant use/logs Other duties as assigned. Minimum Qualifications Experience: Progressively responsible experience in the installation, adjustment, maintenance and repair of commercial and domestic refrigeration and air conditioning systems involving modulatory and safety controls, thermostats, humidifiers and duct stats as well as one year of experience in the installation and repair of central multi-zone air conditioning systems. Journey-level HVAC Series - 4 skill equivalent to that acquired through the completion of a refrigeration or air conditioning mechanic’s apprenticeship program is required. Knowledge and Abilities: Thorough knowledge of the theory and operation of major types of refrigeration and air conditioning equipment and of the materials, equipment and techniques used in the repair and maintenance of such equipment. Working knowledge of electrical voltage, plumbing, refrigeration, electrical and plumbing codes, thermodynamics and automated energy/environmental management systems. Use judgment and discretion in determining the methods and priorities of work orders. Perform skilled electrical and plumbing work. Diagnose and repair major malfunctions in the complex multi-zone air conditioning systems. Devise and control air distribution efficiently with maximum comfort. Diagnose and repair the full range of refrigeration equipment including centrifugal and absorber equipment and/or screw, scroll and reciprocating refrigeration equipment. Special Requirements: Incumbents typically must possess certification in the use of refrigerants. Required Qualifications Employee must be able to work in high locations on ladders, scaffolds, motorized equipment, etc. Employee must be able to work in confined spaces. Employee must be able to work in varying climatic conditions, to include inclement weather. Employee must be able to wear a respirator. Some work on weekends and holidays may be required, and the workweek will be adjusted accordingly. May be required to work alone if working conditions dictate. Position may be needed during campus emergencies such as power outages, minor and major natural disasters, pandemics, etc. License(s)/Certification(s) Journey level skill equivalent to that acquired through completion of an apprenticeship program. Employee must successfully complete hazardous materials, lead and asbestos training courses offered by the university. Must possess a valid California Driver’s License and will be required to obtain a State of California Defensive Driving Permit. Condition(s) of Employment Satisfactory completion of a background check (including LiveScan, as appropriate), that may include, but is not limited to: criminal records check, verification of academic credentials, licenses, certificates, credit history, professional references and/or verification of work history is required for employment. Cal State East Bay will issue a conditional offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Unsatisfactory results may also affect the continued employment of current Cal State East Bay employees who were conditionally offered the position. All background checks are conducted through the university's third party vendor, Accurate. LiveScan is conducted through the University Police Department. EEO Statement As an Equal Opportunity Employer, Cal State East Bay does not discriminate on the basis of any protected categories: age, ancestry, citizenship, color, disability, gender, immigration status, marital status, national origin, race, religion, sexual orientation, or veteran's status. The University is committed to the principles of diversity in employment and to creating a stimulating learning environment for its diverse student body. Other Information All California State University campuses, including Cal State East Bay, are smoke and tobacco-free. For more information, please visit our website here. In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, the Cal State East Bay Annual Campus Security Report is available here. Sponsorship Cal State East Bay is not a sponsoring agency for Staff or Management positions and we are not an E-Verify employer. Mandated Reporter The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 Revised July 21, 2017 as a condition of employment. Advertised: Jan 23 2024 Pacific Standard Time Applications close: May 23 2024 Pacific Daylight Time Closing Date/Time:
Mar 07, 2024
Salary and Benefits PLEASE NOTE: The starting salary placement depends on qualifications and experience and is anticipated to be in the range of $6,464.00 per month to $8,196.00 per month. Cal State East Bay offers a broad range of benefits that includes medical, dental, vision, retirement (CalPERS), 401k, 457, 403(b), dependent and health care reimbursement accounts, life insurance, vacation and sick, 14 paid holidays, one personal holiday and tuition fee waiver. For more information on the benefits program, please visit our benefits website. The CSU Total Compensation Calculator demonstrates the significance of our benefits package. Classification Air Conditioning and Refrigeration Mechanic About Cal State East Bay Cal State East Bay's beautiful main campus is located in the Hayward hills with panoramic views of the San Francisco Bay shoreline. Situated above the city of Hayward, the campus offers an ideal setting for teaching and learning and yet easy access to the many cities along the bay. The University has a satellite campus in Concord, a professional development center in Oakland and a significant presence online. Founded in 1957, Cal State East Bay is one of 23 universities of the California State University system (CSU). Cal State East Bay is recognized as a regionally engaged and globally oriented university with a strong commitment to academic innovation, student success, engaged and service learning, diversity, and sustainability. About the Position The Air Conditioning and Refrigeration Mechanic is distinguished from other classifications in the series by responsibility for the full range of service, maintenance and repair on more complex refrigeration and associated HVAC systems and equipment. The work of an Air Conditioning and Refrigeration Mechanic requires a comprehensive knowledge of refrigeration and air conditioning systems. Incumbents in this classification must be thoroughly familiar with all safety codes and regulations related to the installation and operation of refrigeration and air conditioning systems. Positions in this classification require certification from the Environmental Protection Agency in the use and disposal of compressed refrigerants. Under general direction, incumbents install, troubleshoot, calibrate, service, repair and maintain refrigeration and HVAC systems, equipment, instruments and controls using electrical, electronic, pneumatic or digitally controlled systems; oil, clean, adjust, overhaul, and repair motors, condensers, compressors, oil and vacuum pumps, and similar equipment; perform major overhauls involving disassembly and inspection of all parts, replacement of defective and worn parts, reassembly of equipment instruments and/or controls, and the testing of equipment to ensure proper functioning; locate and diagnose malfunctions using a wide variety of test equipment and instruments; analyze the efficiency of campus refrigeration and air conditioning systems and recommend action for improvement; respond to service requests; diagnose problems in the distribution of air to individual rooms and buildings and make necessary adjustments; use building automation system to diagnose and troubleshoot problems in HVAC and refrigeration systems; maintain inventory and records; order parts and supplies; and train and provide work direction to skilled and semi-skilled workers. Responsibilities Performs at journey level in the installation, repair and operation of campus air conditioning/refrigeration systems, including: Repairs complex refrigeration and HVAC Systems Comprehensive knowledge of air conditioning and refrigeration systems troubleshooting techniques and understanding Thorough understanding of programmable logic Diagnose system malfunctions Calibrate system instruments and controls Analyze systems to maintain proper operation Overhaul Systems as necessary Repair/adjust sealed systems as necessary Replacement of failed components and parts Disassembly and inspection of systems Perform sealed system leak checks Testing of repaired equipment and systems Utilize campus BMS & CMMS systems Performs the additional tasks as required: Cleaning of condensers and evaporators Replacement of filters Replacement of belts Order parts and supplies as necessary Equipment record keeping Maintain inventory Maintain specialized test equipment and tools Support team projects and work as needed Respond to service calls Training: Asbestos O&M Lead Training Aerial/Scissor Lift Training Departmental Meetings Confined Space Attend mandatory tailgate meetings Mandatory CSU/Cal State East Bay trainings Staying abreast of new methods and technology Timekeeping/Reports: Order materials using the department MSR form Shop Clean-up Daily time card submission Vacation and overtime forms submission Campus refrigerant use/logs Other duties as assigned. Minimum Qualifications Experience: Progressively responsible experience in the installation, adjustment, maintenance and repair of commercial and domestic refrigeration and air conditioning systems involving modulatory and safety controls, thermostats, humidifiers and duct stats as well as one year of experience in the installation and repair of central multi-zone air conditioning systems. Journey-level HVAC Series - 4 skill equivalent to that acquired through the completion of a refrigeration or air conditioning mechanic’s apprenticeship program is required. Knowledge and Abilities: Thorough knowledge of the theory and operation of major types of refrigeration and air conditioning equipment and of the materials, equipment and techniques used in the repair and maintenance of such equipment. Working knowledge of electrical voltage, plumbing, refrigeration, electrical and plumbing codes, thermodynamics and automated energy/environmental management systems. Use judgment and discretion in determining the methods and priorities of work orders. Perform skilled electrical and plumbing work. Diagnose and repair major malfunctions in the complex multi-zone air conditioning systems. Devise and control air distribution efficiently with maximum comfort. Diagnose and repair the full range of refrigeration equipment including centrifugal and absorber equipment and/or screw, scroll and reciprocating refrigeration equipment. Special Requirements: Incumbents typically must possess certification in the use of refrigerants. Required Qualifications Employee must be able to work in high locations on ladders, scaffolds, motorized equipment, etc. Employee must be able to work in confined spaces. Employee must be able to work in varying climatic conditions, to include inclement weather. Employee must be able to wear a respirator. Some work on weekends and holidays may be required, and the workweek will be adjusted accordingly. May be required to work alone if working conditions dictate. Position may be needed during campus emergencies such as power outages, minor and major natural disasters, pandemics, etc. License(s)/Certification(s) Journey level skill equivalent to that acquired through completion of an apprenticeship program. Employee must successfully complete hazardous materials, lead and asbestos training courses offered by the university. Must possess a valid California Driver’s License and will be required to obtain a State of California Defensive Driving Permit. Condition(s) of Employment Satisfactory completion of a background check (including LiveScan, as appropriate), that may include, but is not limited to: criminal records check, verification of academic credentials, licenses, certificates, credit history, professional references and/or verification of work history is required for employment. Cal State East Bay will issue a conditional offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Unsatisfactory results may also affect the continued employment of current Cal State East Bay employees who were conditionally offered the position. All background checks are conducted through the university's third party vendor, Accurate. LiveScan is conducted through the University Police Department. EEO Statement As an Equal Opportunity Employer, Cal State East Bay does not discriminate on the basis of any protected categories: age, ancestry, citizenship, color, disability, gender, immigration status, marital status, national origin, race, religion, sexual orientation, or veteran's status. The University is committed to the principles of diversity in employment and to creating a stimulating learning environment for its diverse student body. Other Information All California State University campuses, including Cal State East Bay, are smoke and tobacco-free. For more information, please visit our website here. In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, the Cal State East Bay Annual Campus Security Report is available here. Sponsorship Cal State East Bay is not a sponsoring agency for Staff or Management positions and we are not an E-Verify employer. Mandated Reporter The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 Revised July 21, 2017 as a condition of employment. Advertised: Jan 23 2024 Pacific Standard Time Applications close: May 23 2024 Pacific Daylight Time Closing Date/Time:
California State Polytechnic University Pomona
3801 West Temple Avenue, Pomona, CA 91768, USA
Type of Appointment : Full-Time, Probationary Job Classification : Facilities Maintenance Mechanic Anticipated Hiring Amount : $5,787 per month ($69,444 annually) Work Hours : Monday - Friday, 8am - 5pm, unless otherwise notified Recruitment Closing Date : May 22, 2024 THE DEPARTMENT: Facilities Planning and Management (FP&M) serves as the lead organization for planning, developing, and maintaining the campus ‘natural and built environments in support of the university’s mission. The department seeks to preserve and enhance CPP’s history, aesthetics, physical assets, and natural ecosystems through coordinated planning, design, and construction of buildings, roads, infrastructure, landscaping and other physical improvements. As an advocate on behalf of the university and its auxiliaries, FPM strives to provide facilities that meet scope, budget, operational needs and functional requirements. FPM is comprised of approximately 200 facilities professionals (FTE) that also provides maintenance services including custodial services, landscaping, recycling, building and mechanical trades, energy and utility management, and auto fleet services. The workforce is culturally diverse and multilingual. Its composition includes full time staff throughout FPM who are also earning their degrees and many whom have graduated from Cal Poly Pomona. The staff includes licensed architects and engineers, accountants, planners, project managers, administrative staff, carpenters, plumbers, locksmiths, painters, electricians, landscapers, computer technicians, custodians and other building and mechanical trade technicians. DUTIES AND RESPONSIBILITIES: Working in a team environment, under the general supervision of the Manager of MEP Services and the Supervising and/or Lead Building Service Engineer and primarily responsible for the following: Responsible to perform general routine and preventative maintenance and repairs of the buildings’ mechanical equipment and associated apparatus including work on the utility infrastructure. Perform corrective and preventive maintenance on pumps, pump seals, pump bearings, motors, motor bearings and blower fan bearings, shaft alignments and air compressors. May work in a team or independently, to clean pools & decorative fountains, clean equipment rooms, collect utility meter readings, and perform other related duties as assigned by the shop supervisor and/or lead. Works with journeymen Building Service Engineers on inspecting, troubleshooting, diagnosing and performing preventative maintenance and complex repairs on stationary HVAC equipment such as boilers, chillers, ventilation systems, fans, motors, compressors, condensers, cooling towers, pumps, water treatment systems, and all other associated equipment related to HVAC systems. Incumbent must learn to safely troubleshoot and repair mechanical equipment and apparatus using various test instruments. Learn and expand knowledge on maintaining HVAC controls systems, and other building automation systems such as integrated lighting controls. Incumbent would perform daily assigned work orders and respond to periodic service calls from faculties and staff for hot and cold discomfort calls, report of strange smells, noises, and water leaks, and making minor adjustments and repairs to the mechanical systems to improve occupancy comforts, while providing quality customer service. Perform administrative duties and attend training related to the position. Using the TMA system incumbent is required to routinely and timely enter material and labor hours expended and technician notes related to execution of work orders. Provide material lists and/or estimated labor hours needed to perform specific task or assignments. Attend training classes related to the positions and for professional development to expand mechanical knowledge and skillsets. Maintains a safe, clean and organized work environment that would include the mechanical rooms, trades shops, and assigned service vehicles, tools and equipment used in the performance of work. Organize and keep adequate stock inventory of commonly used supplies and materials, in the storerooms and in the assigned vehicle. Assist other MEP (Electrical and Plumbing) shops by performing needed repairs and maintenance work such as: replacing and re-lamping lighting fixtures and ballasts, installing new electrical circuits, replacing plumbing fixtures, performing valve maintenance, testing & refueling emergency generators, and assisting in fire alarm testing, and perform other related duties as assigned by the shop supervisors. May also be assigned to work with other trade shops to accomplish multi-trade work orders and/or to assist with a variety of miscellaneous maintenance and repair work at the semi-skilled level, including strenuous manual labor. Hand excavates to locate utilities, trench for utilities, perform concrete work, and make minor asphalt repairs. Clean, maintain and make minor repairs to roofs, rain gutters and roof drain systems. Assist in flood control by setting up barricades and providing sandbags. Clean pools, fountains, and storm drains. Place signs, street signs and banners. Install and repair fencing, and move furniture, equipment, and heavy objects. Install earthquake safety preparation anchor fixtures. Install bulletin boards, black and white boards, name plates, and other items. Assemble and make minor repairs to furniture, lay carpet and floor tile, install ceiling tiles, hang doors & frames, clean up liquid spills, and remove hazardous materials. May assist the Lock Shop with rekeying locksets and cutting new keys. May operate forklifts, bobcats, manlift and other related equipment required to accomplish maintenance and repair work. QUALIFICATIONS: High school diploma or equivalent Valid California driver’s license and proof of insurance Four (4) years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Knowledge : Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities : Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. PREFERRED EXPERIENCE: Operate a bobcat, backhoe; experience in welding, MIG, TIG, Arch and gas and soldering. Ability to perform semi-skill work of electrical, plumbing, locksmith, carpenter, painter and other general maintenance trades. Out of State Work The California State University (CSU) system is a network of twenty-three public universities providing access to a quality education through the support of California taxpayers. Part of CSU’s mission is to prepare educated, responsible individuals to contribute to California’s schools, economy, culture, and future. As an agency of the State of California, the CSU’s business operations almost exclusively reside within California. The CSU Out-of-State Employment Policy prohibits hiring employees to perform CSU-related work outside California. For more information, go to https://calstate.policystat.com/policy/10899725/latest/ . Background Check Cal Poly Pomona will make a conditional offer of employment to final job candidates, pending the satisfactory completion of a background check (including a criminal records check). The conditional offer of employment may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. In determining the suitability of the candidate for the position, Cal Poly Pomona will give an individualized assessment to any information that the applicant submits for consideration regarding the criminal conviction history such as the nature, gravity and recency of the conviction, the candidate’s conduct, performance or rehabilitation efforts since the conviction and the nature of the job applied for. For more information, go to https://calstate.policystat.com/policy/13813878/latest/ . CSU Classification Salary Range This position is part of the Teamsters Local 2010 bargaining unit 6. The CSU Classification Standards for this position are located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/Classification-Standards.aspx . The CSU Salary Schedule is located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/salary-schedule-documents.aspx . The classification salary range for this position according to the respective skill level is: minimum $5,787 and maximum $7,396 per month. Please refer to the anticipated hiring range for the appropriate salary rate for this particular position. Employment Eligibility Verification Cal Poly Pomona hires only individuals lawfully authorized to work in the United States. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. For more information, go to https://www.uscis.gov/i-9-central/form-i-9-acceptable-documents Child Abuse/Neglect Reporting Act (CANRA) The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. See policy at https://calstate.policystat.com/v2/policy/10927154/latest/ . Security & Fire Safety In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, California Education Code section 67380, and the Higher Education Opportunity Act (HEOA), Cal Poly Pomona’s Annual Security Report and Annual Fire Safety Report are available for viewing at: https://www.cpp.edu/pdfs/annual_security_report.pdf and https://www.cpp.edu/housing/documents/fire_safety_report.pdf. Pay Transparency Nondiscrimination As a federal contractor, Cal Poly Pomona will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. For more information, see the Pay Transparency Nondiscrimination Provision poster . Reasonable Accommodation We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact the ADA Coordinator by email at ADACoordinator@cpp.edu . For more information, go to Employment Notices . Equal Employment Opportunity Cal Poly Pomona is an Equal Opportunity Employer, committed to promoting an inclusive and diverse workforce. The university subscribes to all state and federal regulations that prohibit discrimination based on race, color, religion, national origin, sex, gender identity/gender expression, sexual orientation, marital status, pregnancy, age, disability, genetic information, medical condition, and veteran or military status. We engage the talents of all qualified workers, regardless of their background. More information is available at Equal Employment Opportunity statement . Other Notices For other important employment notices, we invite you to visit Cal Poly Pomona’s Employment Notices web page. Advertised: May 08 2024 Pacific Daylight Time Applications close: May 22 2024 Pacific Daylight Time Closing Date/Time:
May 09, 2024
Type of Appointment : Full-Time, Probationary Job Classification : Facilities Maintenance Mechanic Anticipated Hiring Amount : $5,787 per month ($69,444 annually) Work Hours : Monday - Friday, 8am - 5pm, unless otherwise notified Recruitment Closing Date : May 22, 2024 THE DEPARTMENT: Facilities Planning and Management (FP&M) serves as the lead organization for planning, developing, and maintaining the campus ‘natural and built environments in support of the university’s mission. The department seeks to preserve and enhance CPP’s history, aesthetics, physical assets, and natural ecosystems through coordinated planning, design, and construction of buildings, roads, infrastructure, landscaping and other physical improvements. As an advocate on behalf of the university and its auxiliaries, FPM strives to provide facilities that meet scope, budget, operational needs and functional requirements. FPM is comprised of approximately 200 facilities professionals (FTE) that also provides maintenance services including custodial services, landscaping, recycling, building and mechanical trades, energy and utility management, and auto fleet services. The workforce is culturally diverse and multilingual. Its composition includes full time staff throughout FPM who are also earning their degrees and many whom have graduated from Cal Poly Pomona. The staff includes licensed architects and engineers, accountants, planners, project managers, administrative staff, carpenters, plumbers, locksmiths, painters, electricians, landscapers, computer technicians, custodians and other building and mechanical trade technicians. DUTIES AND RESPONSIBILITIES: Working in a team environment, under the general supervision of the Manager of MEP Services and the Supervising and/or Lead Building Service Engineer and primarily responsible for the following: Responsible to perform general routine and preventative maintenance and repairs of the buildings’ mechanical equipment and associated apparatus including work on the utility infrastructure. Perform corrective and preventive maintenance on pumps, pump seals, pump bearings, motors, motor bearings and blower fan bearings, shaft alignments and air compressors. May work in a team or independently, to clean pools & decorative fountains, clean equipment rooms, collect utility meter readings, and perform other related duties as assigned by the shop supervisor and/or lead. Works with journeymen Building Service Engineers on inspecting, troubleshooting, diagnosing and performing preventative maintenance and complex repairs on stationary HVAC equipment such as boilers, chillers, ventilation systems, fans, motors, compressors, condensers, cooling towers, pumps, water treatment systems, and all other associated equipment related to HVAC systems. Incumbent must learn to safely troubleshoot and repair mechanical equipment and apparatus using various test instruments. Learn and expand knowledge on maintaining HVAC controls systems, and other building automation systems such as integrated lighting controls. Incumbent would perform daily assigned work orders and respond to periodic service calls from faculties and staff for hot and cold discomfort calls, report of strange smells, noises, and water leaks, and making minor adjustments and repairs to the mechanical systems to improve occupancy comforts, while providing quality customer service. Perform administrative duties and attend training related to the position. Using the TMA system incumbent is required to routinely and timely enter material and labor hours expended and technician notes related to execution of work orders. Provide material lists and/or estimated labor hours needed to perform specific task or assignments. Attend training classes related to the positions and for professional development to expand mechanical knowledge and skillsets. Maintains a safe, clean and organized work environment that would include the mechanical rooms, trades shops, and assigned service vehicles, tools and equipment used in the performance of work. Organize and keep adequate stock inventory of commonly used supplies and materials, in the storerooms and in the assigned vehicle. Assist other MEP (Electrical and Plumbing) shops by performing needed repairs and maintenance work such as: replacing and re-lamping lighting fixtures and ballasts, installing new electrical circuits, replacing plumbing fixtures, performing valve maintenance, testing & refueling emergency generators, and assisting in fire alarm testing, and perform other related duties as assigned by the shop supervisors. May also be assigned to work with other trade shops to accomplish multi-trade work orders and/or to assist with a variety of miscellaneous maintenance and repair work at the semi-skilled level, including strenuous manual labor. Hand excavates to locate utilities, trench for utilities, perform concrete work, and make minor asphalt repairs. Clean, maintain and make minor repairs to roofs, rain gutters and roof drain systems. Assist in flood control by setting up barricades and providing sandbags. Clean pools, fountains, and storm drains. Place signs, street signs and banners. Install and repair fencing, and move furniture, equipment, and heavy objects. Install earthquake safety preparation anchor fixtures. Install bulletin boards, black and white boards, name plates, and other items. Assemble and make minor repairs to furniture, lay carpet and floor tile, install ceiling tiles, hang doors & frames, clean up liquid spills, and remove hazardous materials. May assist the Lock Shop with rekeying locksets and cutting new keys. May operate forklifts, bobcats, manlift and other related equipment required to accomplish maintenance and repair work. QUALIFICATIONS: High school diploma or equivalent Valid California driver’s license and proof of insurance Four (4) years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Knowledge : Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities : Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. PREFERRED EXPERIENCE: Operate a bobcat, backhoe; experience in welding, MIG, TIG, Arch and gas and soldering. Ability to perform semi-skill work of electrical, plumbing, locksmith, carpenter, painter and other general maintenance trades. Out of State Work The California State University (CSU) system is a network of twenty-three public universities providing access to a quality education through the support of California taxpayers. Part of CSU’s mission is to prepare educated, responsible individuals to contribute to California’s schools, economy, culture, and future. As an agency of the State of California, the CSU’s business operations almost exclusively reside within California. The CSU Out-of-State Employment Policy prohibits hiring employees to perform CSU-related work outside California. For more information, go to https://calstate.policystat.com/policy/10899725/latest/ . Background Check Cal Poly Pomona will make a conditional offer of employment to final job candidates, pending the satisfactory completion of a background check (including a criminal records check). The conditional offer of employment may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. In determining the suitability of the candidate for the position, Cal Poly Pomona will give an individualized assessment to any information that the applicant submits for consideration regarding the criminal conviction history such as the nature, gravity and recency of the conviction, the candidate’s conduct, performance or rehabilitation efforts since the conviction and the nature of the job applied for. For more information, go to https://calstate.policystat.com/policy/13813878/latest/ . CSU Classification Salary Range This position is part of the Teamsters Local 2010 bargaining unit 6. The CSU Classification Standards for this position are located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/Classification-Standards.aspx . The CSU Salary Schedule is located on the following site: https://www.calstate.edu/csu-system/careers/compensation/Pages/salary-schedule-documents.aspx . The classification salary range for this position according to the respective skill level is: minimum $5,787 and maximum $7,396 per month. Please refer to the anticipated hiring range for the appropriate salary rate for this particular position. Employment Eligibility Verification Cal Poly Pomona hires only individuals lawfully authorized to work in the United States. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. For more information, go to https://www.uscis.gov/i-9-central/form-i-9-acceptable-documents Child Abuse/Neglect Reporting Act (CANRA) The person holding this position is considered a “mandated reporter” under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. See policy at https://calstate.policystat.com/v2/policy/10927154/latest/ . Security & Fire Safety In compliance with state and federal crime awareness and campus security legislation, including The Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act, California Education Code section 67380, and the Higher Education Opportunity Act (HEOA), Cal Poly Pomona’s Annual Security Report and Annual Fire Safety Report are available for viewing at: https://www.cpp.edu/pdfs/annual_security_report.pdf and https://www.cpp.edu/housing/documents/fire_safety_report.pdf. Pay Transparency Nondiscrimination As a federal contractor, Cal Poly Pomona will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. For more information, see the Pay Transparency Nondiscrimination Provision poster . Reasonable Accommodation We provide reasonable accommodations to applicants and employees with disabilities. Applicants with questions about access or requiring a reasonable accommodation for any part of the application or hiring process should contact the ADA Coordinator by email at ADACoordinator@cpp.edu . For more information, go to Employment Notices . Equal Employment Opportunity Cal Poly Pomona is an Equal Opportunity Employer, committed to promoting an inclusive and diverse workforce. The university subscribes to all state and federal regulations that prohibit discrimination based on race, color, religion, national origin, sex, gender identity/gender expression, sexual orientation, marital status, pregnancy, age, disability, genetic information, medical condition, and veteran or military status. We engage the talents of all qualified workers, regardless of their background. More information is available at Equal Employment Opportunity statement . Other Notices For other important employment notices, we invite you to visit Cal Poly Pomona’s Employment Notices web page. Advertised: May 08 2024 Pacific Daylight Time Applications close: May 22 2024 Pacific Daylight Time Closing Date/Time:
CITY OF FRESNO, CA
Fresno, California, United States
Position Description RECRUITMENT IS OPEN UNTIL FILLED OR UNTIL A SUFFICIENT NUMBER OF APPLICATIONS HAVE BEEN RECEIVED. RECRUITMENT MAY CLOSE AT ANY TIME. Bus Mechanic Leadworker is the lead/advanced working level class in the Bus Mechanic series. Incumbents in this class assign work to a group of skilled and semi-skilled mechanics using independent judgment in deciding methods of repair; and perform advanced working level maintenance and repair on diesel and gasoline powered City buses and related transit equipment. Also, assigns and inspects the work of skilled mechanics and other shop workers and provides technical assistance and training on new or unusually complicated installations or repairs. Incumbents are instrumental in providing support to an Equipment Supervisor for the accomplishment of organizational goals. The selected individual may be required to work weekends, holidays and nights. One vacancy exists in the Maintenance Division of the Department of Transportation/Fresno Area Express. Immediate and future vacancies will be filled from this eligible list for a period of three (3) months from the date the eligible list is created, with the option of extending that period for up to a maximum of two years at the City's discretion. If the examination process is suspended for this recruitment, the eligible list may be limited to three (3) months. Pay,Benefits, & Work Schedule BENEFITS: UNIT 3 Classification - The Fresno City Employees Association, Inc. (FCEA) HEALTH INSURANCE: The City contributes toward monthly premiums for PPO medical, dental and vision for employee and dependents. FLEXIBLE SPENDING ACCOUNT: IRS 125 Plan for health and dependent care expenses. DEFERRED COMPENSATION: Voluntary 457 plan with Fidelity Investments to increase your retirement savings. VACATION LEAVE: Accrue 8 - 14.66 hours per month based on years of service. SICK LEAVE: Eight (8) hours per month, available after 90 days SUPPLEMENTAL SICK- 40 hours per fiscal year. 80 hours lifetime maximum HOLIDAYS: Ten (10) City-observed annual holidays plus birthday and two (2) personal days. SHORT TERM DISABILITY: Provided through California SDI program. BILINGUAL PREMIUM: PAY: $100 per month HEALTH REIMBURSEMENT ARRANGEMENT: Eligible retirees can use remaining Sick Leave balance at 80% of hourly rate and other leave balances, if applicable, to reimburse medical insurance and qualified medical expenses, tax free. RETIREMENT: City of Fresno Retirement Systems, one of the best funded public systems in the state. Reciprocity with other CA public agencies. Vested in Retirement benefits after 5 years of service. City employees do not participate in Social Security. DROP (Deferred Retirement Option Program): an optional, voluntary program that allows an employee to deposit retirement benefits in a special savings account within the Retirement System while continuing to work for the City of Fresno for up to 10 years. Participation minimum is age 50 and vested. Benefits includes ownership of accumulated funds, compound interest earnings, and alternative distribution options. Additional information regarding the City of Fresno benefits is available at https://www.fresno.gov/personnel/human-resources-support/#tab-1 The Requirements Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify for the examination and does not assure a place on the eligibility list. Some positions have been designated as being "safety sensitive" and require all eligibles offered employment to successfully pass a drug test prior to employment. Federal law requires that applicants for positions involving the operation of certain transit vehicles, revenue service vehicles, the transportation of hazardous materials, or heavy equipment over 26,001 pounds requiring a commercial driver's license, must undergo pre-employment drug testing as a condition of employment. This classification is subject to random drug and alcohol testing throughout entire term of employment in this class. These are entrance requirements to the competitive examination and do not assure a place on the eligible list. Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify. TO QUALIFY, an applicant must have: Possession of a High School Diploma or equivalent GED Completion; AND Two (2) years of full-time paid experience performing fully skilled maintenance and repairs on diesel, alternative fuel and/or gasoline powered buses and related equipment; AND Possess a valid National Institute for Automotive Service Excellence (ASE) Master Transit Bus Technician certification, OR, possess a minimum of six (6) valid ASE certificates in the following listed components: Compressed Natural Gas (CNG) Engines (H1) Diesel Engines (H2) Drive Train (H3) Brakes (H4) Suspension/Steering (H5) Electrical/Electronic Systems (H6) Heating, Ventilation & Air Conditioning (H7) Preventive Maintenance & Inspection (H8) The selected eligible candidates certified will be required to successfully pass a Department interview and a Department of Justice fingerprint prior to employment with the City of Fresno. Additional Requirements This position requires the possession of a valid driver's license. Candidates considered for hire must provide proof of a valid driver's license and current copy of their driving record. Possess a valid California Drivers License at time of appointment. Within thirty (30) days of appointment must obtain a valid Commercial Instructional Permit. Within six (6) months must obtain and maintain a valid Commercial Class B California Driver's License with required endorsements and without air brake restriction. How To Apply APPLICANTS MUST COMPLETE AN ON-LINE APPLICATION. PLEASE VISIT www.fresno.gov/jobs. TO APPLY. For information on how to complete an on-line application, please view "Instruction Guide" on the City's website, Personnel Services Career Opportunities page, or call (559) 621-6950 for assistance. Resumes will not be accepted in lieu of a completed employment application. ALL CORRESPONDENCE regarding this recruitment and exam process will be sent via e-mail. All applicants will acknowledge such understanding when they complete their on-line application. Verify we have your correct e-mail address before you submit your application. It is an applicant's responsibility to check their email frequently to ensure they receive all pertinent communication from the Personnel Services Department on a timely basis. Applicants will receive an automatically generated confirmation e-mail upon a successful application submittal. The e-mail is the only proof of submittal. It is an applicant's responsibility to check their email account and to ensure it is set up to accept emails from the City of Fresno. Dependent upon your settings, notices from the City of Fresno may be directed to the "junk mail" or "spam" folders. It is the applicant's responsibility to check these folders. Applications must be submitted by midnight on the filing deadline or they will not be accepted for any reason. FOR THIS RECRUITMENT, IT IS RECOMMENDED THAT PERMANENT FRESNO CITY EMPLOYEES APPLY THROUGH PEOPLESOFT SELF SERVICE. Selection Process The examination process may consist of the following: Written Exam -100%: A multiple-choice job related written examination may be administered which will be worth 100% of your score in determining your eligibility and placement on the eligible list. The written examination is designed to assess a candidate's knowledge in the following areas: candidate's ability to effectively provide lead direction to staff, train subordinates, interpersonal relations, ability to diagnose transit equipment problems with engines (gasoline and diesel), suspension and steering, brakes, air conditioning systems, hydraulic systems, ignition and fuel systems; AND knowledge of the operating principles of the use of tools/equipment used in the repair/maintenance of transit vehicles and safety practices. Candidates must achieve a passing score to qualify for the eligible list. The written examination has been tentatively scheduled for the week of: October 23, 2023. Veteran Preference Regulations Candidates applying for veteran's preference are required to submit a copy of their DD214 with their application during the specified filing period. Evidence must be presented to indicate that the candidate was discharged honorably from the military service. Veterans, including City employees, must resubmit proof of honorable service for every examination for which veteran's preference credit is requested. Qualified veterans who pass the examination will have five (5) points added to their final score. Equal Opportunity Employer The City of Fresno is an Equal Opportunity Employer. Should you need a special accommodation due to a qualifying disability, please contact the Personnel Service Department at (559) 621-6950 in advance of the examination. Closing Date/Time: 05/30/2024
Mar 07, 2024
Full Time
Position Description RECRUITMENT IS OPEN UNTIL FILLED OR UNTIL A SUFFICIENT NUMBER OF APPLICATIONS HAVE BEEN RECEIVED. RECRUITMENT MAY CLOSE AT ANY TIME. Bus Mechanic Leadworker is the lead/advanced working level class in the Bus Mechanic series. Incumbents in this class assign work to a group of skilled and semi-skilled mechanics using independent judgment in deciding methods of repair; and perform advanced working level maintenance and repair on diesel and gasoline powered City buses and related transit equipment. Also, assigns and inspects the work of skilled mechanics and other shop workers and provides technical assistance and training on new or unusually complicated installations or repairs. Incumbents are instrumental in providing support to an Equipment Supervisor for the accomplishment of organizational goals. The selected individual may be required to work weekends, holidays and nights. One vacancy exists in the Maintenance Division of the Department of Transportation/Fresno Area Express. Immediate and future vacancies will be filled from this eligible list for a period of three (3) months from the date the eligible list is created, with the option of extending that period for up to a maximum of two years at the City's discretion. If the examination process is suspended for this recruitment, the eligible list may be limited to three (3) months. Pay,Benefits, & Work Schedule BENEFITS: UNIT 3 Classification - The Fresno City Employees Association, Inc. (FCEA) HEALTH INSURANCE: The City contributes toward monthly premiums for PPO medical, dental and vision for employee and dependents. FLEXIBLE SPENDING ACCOUNT: IRS 125 Plan for health and dependent care expenses. DEFERRED COMPENSATION: Voluntary 457 plan with Fidelity Investments to increase your retirement savings. VACATION LEAVE: Accrue 8 - 14.66 hours per month based on years of service. SICK LEAVE: Eight (8) hours per month, available after 90 days SUPPLEMENTAL SICK- 40 hours per fiscal year. 80 hours lifetime maximum HOLIDAYS: Ten (10) City-observed annual holidays plus birthday and two (2) personal days. SHORT TERM DISABILITY: Provided through California SDI program. BILINGUAL PREMIUM: PAY: $100 per month HEALTH REIMBURSEMENT ARRANGEMENT: Eligible retirees can use remaining Sick Leave balance at 80% of hourly rate and other leave balances, if applicable, to reimburse medical insurance and qualified medical expenses, tax free. RETIREMENT: City of Fresno Retirement Systems, one of the best funded public systems in the state. Reciprocity with other CA public agencies. Vested in Retirement benefits after 5 years of service. City employees do not participate in Social Security. DROP (Deferred Retirement Option Program): an optional, voluntary program that allows an employee to deposit retirement benefits in a special savings account within the Retirement System while continuing to work for the City of Fresno for up to 10 years. Participation minimum is age 50 and vested. Benefits includes ownership of accumulated funds, compound interest earnings, and alternative distribution options. Additional information regarding the City of Fresno benefits is available at https://www.fresno.gov/personnel/human-resources-support/#tab-1 The Requirements Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify for the examination and does not assure a place on the eligibility list. Some positions have been designated as being "safety sensitive" and require all eligibles offered employment to successfully pass a drug test prior to employment. Federal law requires that applicants for positions involving the operation of certain transit vehicles, revenue service vehicles, the transportation of hazardous materials, or heavy equipment over 26,001 pounds requiring a commercial driver's license, must undergo pre-employment drug testing as a condition of employment. This classification is subject to random drug and alcohol testing throughout entire term of employment in this class. These are entrance requirements to the competitive examination and do not assure a place on the eligible list. Applicants must meet the minimum qualifications on or before the posted filing deadline in order to qualify. TO QUALIFY, an applicant must have: Possession of a High School Diploma or equivalent GED Completion; AND Two (2) years of full-time paid experience performing fully skilled maintenance and repairs on diesel, alternative fuel and/or gasoline powered buses and related equipment; AND Possess a valid National Institute for Automotive Service Excellence (ASE) Master Transit Bus Technician certification, OR, possess a minimum of six (6) valid ASE certificates in the following listed components: Compressed Natural Gas (CNG) Engines (H1) Diesel Engines (H2) Drive Train (H3) Brakes (H4) Suspension/Steering (H5) Electrical/Electronic Systems (H6) Heating, Ventilation & Air Conditioning (H7) Preventive Maintenance & Inspection (H8) The selected eligible candidates certified will be required to successfully pass a Department interview and a Department of Justice fingerprint prior to employment with the City of Fresno. Additional Requirements This position requires the possession of a valid driver's license. Candidates considered for hire must provide proof of a valid driver's license and current copy of their driving record. Possess a valid California Drivers License at time of appointment. Within thirty (30) days of appointment must obtain a valid Commercial Instructional Permit. Within six (6) months must obtain and maintain a valid Commercial Class B California Driver's License with required endorsements and without air brake restriction. How To Apply APPLICANTS MUST COMPLETE AN ON-LINE APPLICATION. PLEASE VISIT www.fresno.gov/jobs. TO APPLY. For information on how to complete an on-line application, please view "Instruction Guide" on the City's website, Personnel Services Career Opportunities page, or call (559) 621-6950 for assistance. Resumes will not be accepted in lieu of a completed employment application. ALL CORRESPONDENCE regarding this recruitment and exam process will be sent via e-mail. All applicants will acknowledge such understanding when they complete their on-line application. Verify we have your correct e-mail address before you submit your application. It is an applicant's responsibility to check their email frequently to ensure they receive all pertinent communication from the Personnel Services Department on a timely basis. Applicants will receive an automatically generated confirmation e-mail upon a successful application submittal. The e-mail is the only proof of submittal. It is an applicant's responsibility to check their email account and to ensure it is set up to accept emails from the City of Fresno. Dependent upon your settings, notices from the City of Fresno may be directed to the "junk mail" or "spam" folders. It is the applicant's responsibility to check these folders. Applications must be submitted by midnight on the filing deadline or they will not be accepted for any reason. FOR THIS RECRUITMENT, IT IS RECOMMENDED THAT PERMANENT FRESNO CITY EMPLOYEES APPLY THROUGH PEOPLESOFT SELF SERVICE. Selection Process The examination process may consist of the following: Written Exam -100%: A multiple-choice job related written examination may be administered which will be worth 100% of your score in determining your eligibility and placement on the eligible list. The written examination is designed to assess a candidate's knowledge in the following areas: candidate's ability to effectively provide lead direction to staff, train subordinates, interpersonal relations, ability to diagnose transit equipment problems with engines (gasoline and diesel), suspension and steering, brakes, air conditioning systems, hydraulic systems, ignition and fuel systems; AND knowledge of the operating principles of the use of tools/equipment used in the repair/maintenance of transit vehicles and safety practices. Candidates must achieve a passing score to qualify for the eligible list. The written examination has been tentatively scheduled for the week of: October 23, 2023. Veteran Preference Regulations Candidates applying for veteran's preference are required to submit a copy of their DD214 with their application during the specified filing period. Evidence must be presented to indicate that the candidate was discharged honorably from the military service. Veterans, including City employees, must resubmit proof of honorable service for every examination for which veteran's preference credit is requested. Qualified veterans who pass the examination will have five (5) points added to their final score. Equal Opportunity Employer The City of Fresno is an Equal Opportunity Employer. Should you need a special accommodation due to a qualifying disability, please contact the Personnel Service Department at (559) 621-6950 in advance of the examination. Closing Date/Time: 05/30/2024
City of Los Angeles
City Of Los Angeles, California, United States
DUTIES ANNUAL SALARY $80,805 to $100,411; $85,211 to $111,242; and $105,840 to $117,407 NOTES : Candidates from the eligible list are normally appointed to vacancies in the lower pay grade positions.Annual salary is at the start of the pay range. The current salary range is subject to change. Please confirm the starting salary with the hiring department before accepting a job offer. For information regarding reciprocity between the City of Los Angeles departments and LADWP, go to http://per.lacity.org/Reciprocity_CityDepts_and_DWP.pdf . An Underground Distribution Construction Mechanic constructs, maintains, and repairs underground ducts, maintenance holes, and vaults. REQUIREMENT(S)/MINIMUM QUALIFICATION(S) One year of full-time paid experience as a Maintenance Laborer, Maintenance and Construction Helper, or Electrical Craft Helper with the City of Los Angeles; or One year full-time paid experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry; or One year of full-time paid experience as a Utility Pre-Craft Trainee with the Los Angeles Department of Water and Power, with: six months in the Underground Construction Mechanic trade, or working on a district crew in Power Distribution overhead and underground, or with Water Distribution, or One year full-time paid experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry while in the United States Armed Forces. PROCESS NOTES In addition to the regular City application, all applicants must complete an Underground Distribution Construction Mechanic Qualifications Questionnaire at the time of filing. The Underground Distribution Construction Mechanic Qualifications Questionnaire is located within the Supplemental Questions section of the City application. Applicants who fail to complete the Qualifications Questionnaire will not be considered further in this examination, and their application will not be processed. All entry-level positions are temporary training positions as defined in Civil Service Commission Rule 5.30. An Underground Distribution Construction Mechanic must successfully complete an extensive on-the-job and classroom training program within twenty-four (24) months in order to receive an appointment to a regular Underground Distribution Construction Mechanic journey-level position.Trainees receive extensive classroom training as well as on the job training as an Underground Distribution Construction Mechanic Trainee.Underground Distribution Construction Mechanic Trainees are required to utilize various tools and equipment while working in a confined area of an underground vault, do heavy manual labor, climb ladders, install trench shoring, navigate around trench jacks in confined areas, and operate jackhammers and other pneumatic tools.Applicants filing using City of Los Angeles experience for Requirement #3 must submit a "Verification of Work Experience" (VWE) form with the required signatures, verifying their experience in the areas noted above. The VWE form may be obtained online at http://per.lacity.org/exams/vwe-sup.pdf . Applicants may attach the completed VWE form to their on-line application at the time of filing, or will have seven (7) calendar days from the online submission date to email a copy of their completed VWE form, including the required signatures to: per.appdocs@lacity.org . The subject line of your email must include the exam title, your name and indicate it is a VWE. In the body of your email, you must also include your first and last name, last four digits of your Social Security Number and contact phone number. Applicants who fail to submit their signed VWE form within the time required will not be considered further in this examination and their application will not be processed.Active United States Military personnel may file for this examination. However, they cannot be appointed until they have completed their military service and have been discharged with satisfactory performance. Proof of military service and satisfactory performance must be provided prior to appointment.Applicants filing under Requirement #4 must submit at the time of filing their application a copy of their DD-214 or a copy of their military identification indicating End of Active Obligated Service (EAOS) date within six months from the application date. The copy of the DD-214 or military identification with EAOS must be attached to the on-line application BEFORE the application is submitted. If the copy is attached AFTER the on-line application has been submitted, it will not be available to the City and applicants WILL NOT be credited with having submitted it. Applicants who fail to submit the DD-214 or military identification with EAOS at the time of filing by attaching it to the on-line application will not be considered further in this examination.A valid unrestricted California driver's license is required. Applicants will be disqualified and not eligible for hire if their record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation (such as DUI).A valid California Class "B" commercial driver's license with a current medical certificate approved by the State of California Department of Motor Vehicles is required to be obtained and maintained during the temporary training period and prior to appointment to a journey-level position. All Underground Distribution Construction Mechanics are required to drive commercial vehicles.Applicants residing outside the State of California may apply with a valid and unrestricted driver's license at the time of hiring, and a valid California driver's license must be obtained within 30 days of hire, and maintained during the course of employment.See the corresponding "Job Preview" for additional information regarding the duties of an Underground Distribution Construction Mechanic in a trainee and/or journey-level position. The Job Preview is available on-line at http://per.lacity.org/exams/UndergroundDistributionConstructionMechanic.pdf . SELECTIVE CERTIFICATION In accordance with Charter Section 1010 (b) and Civil Service Rule 5.31, selective certification will be used for some positions that require special skills and/or training in one of more of the following areas. Only those persons who meet the requirement stated below may be considered for appointment to fill such positions by the Department of Water and Power: Possession, at the time of appointment, of a "Journey-level Certification Number" issued by the Department of Water and Power. Journey-level Underground Distribution Construction Mechanic constructs, maintains, and repairs underground ducts, maintenance structures, vaults, concrete curbs, gutters, and sidewalks, or may act as a lead worker in such work; performs concrete work in and around hazardous working conditions such as energized duct lines and vaults, including locating, breaking, and chipping of concrete that encases energized cables up to and including 345kV circuitry; and performs related work. SELECTIVE CERTIFICATION NOTES: Three years of full-time paid experience in a position which provides experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry will be required in order to take the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test administered by the Department of Water and Power. Those who attain a passing score on this Performance Test will receive a "Journey Level Certification Number" issued by the Department of Water and Power that is required to be considered for Selective Certification.Selective Certification will be used to fill a limited number of regular "journey-level" vacant positions in the Department of Water and Power directly from the Underground Distribution Construction Mechanic eligible list. Only those applicants who wish to be considered for appointment to these limited number of regular "journey-level" Underground Distribution Construction Mechanic positions need to check the Selective Certification box on their City application.It is anticipated that a significant number of individuals will be interested in the limited number of available regular "journey-level" position as described in Note 2. Therefore, only those applicants possessing the greatest likelihood of successfully performing the duties of a journey-level Underground Distribution Construction Mechanic as determined by an Expert Review Panel evaluation of the qualifications provided in the applicant's City application and Qualifications Questionnaire will be invited to take the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test.Participation in Selective Certification is optional and voluntary. If you do not wish to be considered for the Underground Distribution Construction Mechanic journey-level positions, you will be considered for the Underground Distribution Construction Mechanic trainee positions.Selective Certification and the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test may not be available for every test administration. They will only be available periodically, based solely on the Department of Water and Power's hiring need to fill regular "journey-level" positions directly from the Underground Distribution Construction Mechanic eligible list. WHERE TO APPLY & APPLICATION DEADLINE Applications will only be accepted on-line. When you are viewing the on-line job bulletin of your choice, simply scroll to the top of the page and select the "Apply" icon. On-line job bulletins are also available at https://www.governmentjobs.com/careers/lacity . NOTE : Applicants are urged to apply early to ensure you have time to resolve any technical issues you may encounter. Applications will only be accepted on-line on the dates listed below: From 8:00 a.m. Friday, December 9, 2022 to 11:59 p.m. Thursday, December 22, 2022 The examination may close without prior notice at any time after a sufficient number of applications have been received. Filing periods may change without prior notice or additional dates may be added, as needed, at a later date. For administrative purposes, filing will close periodically and reopen on the dates noted in the "Application Deadline" section of this bulletin. In accordance with Civil Service Rule 4.2, all applicants who apply may not be tested in this examination. To meet anticipated hiring needs, only a limited number of qualified applicants will be invited to participate in the selection process in the following order: 1) Los Angeles City Promotional applicants who meet the minimum requirements. You must have received a regular appointment to a City position or be on a reserve list to apply for this examination as a promotional candidate; 2) Applicants currently employed by the City of Los Angeles on a part-time or exempt basis who meet the minimum requirements; 3) Remaining applicants who meet the minimum requirements in sufficient numbers to meet hiring needs in the order that applications were received or by qualifications review. Applicants not selected to be tested may re-apply in a subsequent filing period in order to be considered for that period's selection process. QUALIFICATIONS REVIEW Should a large number of qualified candidates file for this examination, each candidate's qualifications for the position of Underground Distribution Construction Mechanic may be evaluated based on the candidate's Qualifications Questionnaire. Those candidates considered possessing the greatest likelihood of successfully performing the duties of an Underground Distribution Construction Mechanic based solely on the information submitted for qualifications review will continue in the selection process. SELECTION PROCESS Examination Weight: Multiple-choice Test - 100% The examination score will be based entirely on a multiple-choice test. In the multiple-choice test, emphasis may be placed on the candidate's experience, training, and professional development as they have provided the knowledge of: operation and minor maintenance of power tools and hand tools; materials used in form construction; use and maintenance of a variety of tools, materials and equipment used in a large range of construction activities, such as Portland cement, concrete and cement grout work, asphalt work, excavation and breaking of concrete; methods, procedures, tools, materials, and equipment used in electrical conduit work, and digging, shoring, and cribbing; rigging techniques, including hoisting and proper use of slings, knots, ropes, and cables; standard hand signals used in construction work; survey markings and symbols used to locate underground facilities; procedures and equipment used to test explosive gases; basic first aid practices and procedures; traffic control methods for construction activities; and the ability to perform basic arithmetic; read and interpret construction plans and diagrams for maintenance holes, vaults, and conduit lines; and other necessary skills, knowledge, and abilities. The multiple-choice test will be proctored and administered on-line during a single session. Candidates invited to participate in the on-line multiple-choice test will be able to take the test as instructed from a remote location using a computer with a webcam and a reliable internet connection. Candidates will receive an e-mail from the City of Los Angeles outlining the dates and specific steps on how to take the multiple-choice test and advisory essay on-line. It is anticipated that the remote proctored multiple-choice test will be administered at a later date to be determined. It is anticipated that the remote proctored multiple-choice test will be administered between Tuesday, February 7, 2023 and Monday, February 13, 2023. Candidates who do not complete and submit the remote proctored multiple-choice test on-line using a computer by the specified date and time as instructed will not be considered further in this examination. Additional test dates may be added as needed. For detailed Information regarding the process for completing the multiple-choice test on-line, visit https://per.lacity.org/jobs/online-testing/remote-proctored.html . Due to COVID-19 and social distancing requirements, only candidates who demonstrate a hardship may be offered the option to take the multiple-choice test onsite at a City facility. SCORE BANDING The scores in the multiple-choice test will be reported in bands that reflect candidates' performance in the multiple-choice test. Seniority credit for promotional candidates and veteran credit for open candidates who attain a final passing score will be added to the banded scores of each candidate. The specific range of each band will be determined by Personnel Department staff after the multiple-choice test is administered. Consideration will be given to the number of candidates taking the multiple-choice test and the existing and anticipated number of vacancies, such that there are a sufficient number of eligibles on the list to satisfy current and future vacancies for the next two years. Therefore, the Final General Average for the Underground Distribution Mechanic examination will consist of the banded score after adding seniority credits for promotional candidates or veteran credits for open candidates who attained a final passing score. General information regarding on-line testing can be obtained by going to https://per.lacity.org/jobs/online-testing.html . FAQs for on-line testing are available at https://per.lacity.org/faqs/employment-testing-process.html . NOTICE : Test dates may be postponed in order to help protect the safety of our candidates and prevent the spread of COVID-19. Candidates will receive an e-mail from the City of Los Angeles Personnel Department if the anticipated multiple-choice test dates are postponed. NOTES : This examination is based on a validation study, and as provided by Civil Service Commission Rule 4.20, the multiple-choice test will not be subject to candidate review. You may take the Underground Distribution Construction Mechanic multiple-choice test only once every 24 months under this bulletin. If you have taken the Underground Distribution Construction Mechanic multiple-choice test during an open filing period in the Personnel Department within the last 24 months under this bulletin, you may not file for this examination at this time. Based on City policy, before being hired in this position, you may be required to undergo a drug and alcohol-screening test. As a covered entity under the Fair Employment and Housing Act and Title II of the Americans with Disabilities Act, the City of Los Angeles does not discriminate on the basis of disability and upon request, will provide reasonable accommodations to ensure equal access to its programs, services, and activities. To request a disability accommodation, please complete the Disability Accommodation Form within 14 calendar days of the submittal of the City application. The Disability Accommodation Form can be obtained at http://per.lacity.org/exams/verify_disability.pdf .Applications are accepted subject to review to ensure that minimum qualifications are met. Candidates may be disqualified at any time if it is determined that they do not possess the minimum qualifications stated on this bulletin.The promotional list will ordinarily be used ahead of the open competitive list. However, if open competitive candidates receive a higher score, without military credits, than the highest available promotional candidate, after adding seniority credit at the rate of 0.25 of a point for each year of continuous classified City service, the Civil Service Commission, upon request of the appointing authority, may approve certification of such open competitive candidates ahead of the promotional candidates. A final average score of 70% is required to be placed on the eligible list.You must have received a regular appointment to a City position or be on a reserve list to file on a promotional basis.Your rank on the eligible list may change as scores of candidates from other administrations of this examination are merged onto one list.In conjunction with Civil Service Rules, applicants who have received a regular appointment to a City position or are on a reserve list will be considered Promotional candidates while all other applicants will be considered Open candidates.In accordance with Civil Service Rule, Sec. 4.24, review periods may be combined. Candidates in the examination process may file protests as provided in Sec. 4.20, 4.22 and 4.23 as applicable and within the required time frame; however, the Personnel Department may respond to and resolve protests prior to the establishment of the eligible list.For candidates seeking initial City employment, in accordance with Los Angeles City Ordinance 187134, information regarding COVID-19 vaccination requirements as conditions of employment may be found at: https://clkrep.lacity.org/onlinedocs/2021/21-0921_ord_187134_8-24-21.pdf . Notice : If you receive and accept an offer of employment to a regular position with the City of Los Angeles, your employee benefit coverage (including health and dental coverage as well as life insurance) will commence approximately six weeks after your original regular appointment. Not all positions in the City receive benefit coverage; you should inquire regarding the availability of employee benefits prior to accepting a position. All City employees are required to be Disaster Service Workers. THIS EXAMINATION IS TO BE GIVEN BOTH ON AN INTERDEPARTMENTAL PROMOTIONAL AND OPEN COMPETITIVE BASIS The City of Los Angeles does not discriminate on the basis of race, religion, national origin, sex, age, marital status, sexual orientation, gender identity, gender expression, disability, creed, color, ancestry, medical condition (cancer), or Acquired Immune Deficiency Syndrome. AN EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER For additional information and FAQs regarding the City's hiring process, please go to: https://per.lacity.org/faqs/employment-testing-process.html There are many things to consider in a new employer. Visit the following webpage to view benefits the City of Los Angeles offers its employees: http://per.lacity.org/bens/index.html Closing Date/Time:
Apr 22, 2024
Full Time
DUTIES ANNUAL SALARY $80,805 to $100,411; $85,211 to $111,242; and $105,840 to $117,407 NOTES : Candidates from the eligible list are normally appointed to vacancies in the lower pay grade positions.Annual salary is at the start of the pay range. The current salary range is subject to change. Please confirm the starting salary with the hiring department before accepting a job offer. For information regarding reciprocity between the City of Los Angeles departments and LADWP, go to http://per.lacity.org/Reciprocity_CityDepts_and_DWP.pdf . An Underground Distribution Construction Mechanic constructs, maintains, and repairs underground ducts, maintenance holes, and vaults. REQUIREMENT(S)/MINIMUM QUALIFICATION(S) One year of full-time paid experience as a Maintenance Laborer, Maintenance and Construction Helper, or Electrical Craft Helper with the City of Los Angeles; or One year full-time paid experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry; or One year of full-time paid experience as a Utility Pre-Craft Trainee with the Los Angeles Department of Water and Power, with: six months in the Underground Construction Mechanic trade, or working on a district crew in Power Distribution overhead and underground, or with Water Distribution, or One year full-time paid experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry while in the United States Armed Forces. PROCESS NOTES In addition to the regular City application, all applicants must complete an Underground Distribution Construction Mechanic Qualifications Questionnaire at the time of filing. The Underground Distribution Construction Mechanic Qualifications Questionnaire is located within the Supplemental Questions section of the City application. Applicants who fail to complete the Qualifications Questionnaire will not be considered further in this examination, and their application will not be processed. All entry-level positions are temporary training positions as defined in Civil Service Commission Rule 5.30. An Underground Distribution Construction Mechanic must successfully complete an extensive on-the-job and classroom training program within twenty-four (24) months in order to receive an appointment to a regular Underground Distribution Construction Mechanic journey-level position.Trainees receive extensive classroom training as well as on the job training as an Underground Distribution Construction Mechanic Trainee.Underground Distribution Construction Mechanic Trainees are required to utilize various tools and equipment while working in a confined area of an underground vault, do heavy manual labor, climb ladders, install trench shoring, navigate around trench jacks in confined areas, and operate jackhammers and other pneumatic tools.Applicants filing using City of Los Angeles experience for Requirement #3 must submit a "Verification of Work Experience" (VWE) form with the required signatures, verifying their experience in the areas noted above. The VWE form may be obtained online at http://per.lacity.org/exams/vwe-sup.pdf . Applicants may attach the completed VWE form to their on-line application at the time of filing, or will have seven (7) calendar days from the online submission date to email a copy of their completed VWE form, including the required signatures to: per.appdocs@lacity.org . The subject line of your email must include the exam title, your name and indicate it is a VWE. In the body of your email, you must also include your first and last name, last four digits of your Social Security Number and contact phone number. Applicants who fail to submit their signed VWE form within the time required will not be considered further in this examination and their application will not be processed.Active United States Military personnel may file for this examination. However, they cannot be appointed until they have completed their military service and have been discharged with satisfactory performance. Proof of military service and satisfactory performance must be provided prior to appointment.Applicants filing under Requirement #4 must submit at the time of filing their application a copy of their DD-214 or a copy of their military identification indicating End of Active Obligated Service (EAOS) date within six months from the application date. The copy of the DD-214 or military identification with EAOS must be attached to the on-line application BEFORE the application is submitted. If the copy is attached AFTER the on-line application has been submitted, it will not be available to the City and applicants WILL NOT be credited with having submitted it. Applicants who fail to submit the DD-214 or military identification with EAOS at the time of filing by attaching it to the on-line application will not be considered further in this examination.A valid unrestricted California driver's license is required. Applicants will be disqualified and not eligible for hire if their record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation (such as DUI).A valid California Class "B" commercial driver's license with a current medical certificate approved by the State of California Department of Motor Vehicles is required to be obtained and maintained during the temporary training period and prior to appointment to a journey-level position. All Underground Distribution Construction Mechanics are required to drive commercial vehicles.Applicants residing outside the State of California may apply with a valid and unrestricted driver's license at the time of hiring, and a valid California driver's license must be obtained within 30 days of hire, and maintained during the course of employment.See the corresponding "Job Preview" for additional information regarding the duties of an Underground Distribution Construction Mechanic in a trainee and/or journey-level position. The Job Preview is available on-line at http://per.lacity.org/exams/UndergroundDistributionConstructionMechanic.pdf . SELECTIVE CERTIFICATION In accordance with Charter Section 1010 (b) and Civil Service Rule 5.31, selective certification will be used for some positions that require special skills and/or training in one of more of the following areas. Only those persons who meet the requirement stated below may be considered for appointment to fill such positions by the Department of Water and Power: Possession, at the time of appointment, of a "Journey-level Certification Number" issued by the Department of Water and Power. Journey-level Underground Distribution Construction Mechanic constructs, maintains, and repairs underground ducts, maintenance structures, vaults, concrete curbs, gutters, and sidewalks, or may act as a lead worker in such work; performs concrete work in and around hazardous working conditions such as energized duct lines and vaults, including locating, breaking, and chipping of concrete that encases energized cables up to and including 345kV circuitry; and performs related work. SELECTIVE CERTIFICATION NOTES: Three years of full-time paid experience in a position which provides experience in maintenance and construction work involving pipeline construction, asphalt work, electrical conduit construction, or concrete and cement work or carpentry will be required in order to take the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test administered by the Department of Water and Power. Those who attain a passing score on this Performance Test will receive a "Journey Level Certification Number" issued by the Department of Water and Power that is required to be considered for Selective Certification.Selective Certification will be used to fill a limited number of regular "journey-level" vacant positions in the Department of Water and Power directly from the Underground Distribution Construction Mechanic eligible list. Only those applicants who wish to be considered for appointment to these limited number of regular "journey-level" Underground Distribution Construction Mechanic positions need to check the Selective Certification box on their City application.It is anticipated that a significant number of individuals will be interested in the limited number of available regular "journey-level" position as described in Note 2. Therefore, only those applicants possessing the greatest likelihood of successfully performing the duties of a journey-level Underground Distribution Construction Mechanic as determined by an Expert Review Panel evaluation of the qualifications provided in the applicant's City application and Qualifications Questionnaire will be invited to take the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test.Participation in Selective Certification is optional and voluntary. If you do not wish to be considered for the Underground Distribution Construction Mechanic journey-level positions, you will be considered for the Underground Distribution Construction Mechanic trainee positions.Selective Certification and the Underground Distribution Construction Mechanic Apprenticeship Final Performance Test may not be available for every test administration. They will only be available periodically, based solely on the Department of Water and Power's hiring need to fill regular "journey-level" positions directly from the Underground Distribution Construction Mechanic eligible list. WHERE TO APPLY & APPLICATION DEADLINE Applications will only be accepted on-line. When you are viewing the on-line job bulletin of your choice, simply scroll to the top of the page and select the "Apply" icon. On-line job bulletins are also available at https://www.governmentjobs.com/careers/lacity . NOTE : Applicants are urged to apply early to ensure you have time to resolve any technical issues you may encounter. Applications will only be accepted on-line on the dates listed below: From 8:00 a.m. Friday, December 9, 2022 to 11:59 p.m. Thursday, December 22, 2022 The examination may close without prior notice at any time after a sufficient number of applications have been received. Filing periods may change without prior notice or additional dates may be added, as needed, at a later date. For administrative purposes, filing will close periodically and reopen on the dates noted in the "Application Deadline" section of this bulletin. In accordance with Civil Service Rule 4.2, all applicants who apply may not be tested in this examination. To meet anticipated hiring needs, only a limited number of qualified applicants will be invited to participate in the selection process in the following order: 1) Los Angeles City Promotional applicants who meet the minimum requirements. You must have received a regular appointment to a City position or be on a reserve list to apply for this examination as a promotional candidate; 2) Applicants currently employed by the City of Los Angeles on a part-time or exempt basis who meet the minimum requirements; 3) Remaining applicants who meet the minimum requirements in sufficient numbers to meet hiring needs in the order that applications were received or by qualifications review. Applicants not selected to be tested may re-apply in a subsequent filing period in order to be considered for that period's selection process. QUALIFICATIONS REVIEW Should a large number of qualified candidates file for this examination, each candidate's qualifications for the position of Underground Distribution Construction Mechanic may be evaluated based on the candidate's Qualifications Questionnaire. Those candidates considered possessing the greatest likelihood of successfully performing the duties of an Underground Distribution Construction Mechanic based solely on the information submitted for qualifications review will continue in the selection process. SELECTION PROCESS Examination Weight: Multiple-choice Test - 100% The examination score will be based entirely on a multiple-choice test. In the multiple-choice test, emphasis may be placed on the candidate's experience, training, and professional development as they have provided the knowledge of: operation and minor maintenance of power tools and hand tools; materials used in form construction; use and maintenance of a variety of tools, materials and equipment used in a large range of construction activities, such as Portland cement, concrete and cement grout work, asphalt work, excavation and breaking of concrete; methods, procedures, tools, materials, and equipment used in electrical conduit work, and digging, shoring, and cribbing; rigging techniques, including hoisting and proper use of slings, knots, ropes, and cables; standard hand signals used in construction work; survey markings and symbols used to locate underground facilities; procedures and equipment used to test explosive gases; basic first aid practices and procedures; traffic control methods for construction activities; and the ability to perform basic arithmetic; read and interpret construction plans and diagrams for maintenance holes, vaults, and conduit lines; and other necessary skills, knowledge, and abilities. The multiple-choice test will be proctored and administered on-line during a single session. Candidates invited to participate in the on-line multiple-choice test will be able to take the test as instructed from a remote location using a computer with a webcam and a reliable internet connection. Candidates will receive an e-mail from the City of Los Angeles outlining the dates and specific steps on how to take the multiple-choice test and advisory essay on-line. It is anticipated that the remote proctored multiple-choice test will be administered at a later date to be determined. It is anticipated that the remote proctored multiple-choice test will be administered between Tuesday, February 7, 2023 and Monday, February 13, 2023. Candidates who do not complete and submit the remote proctored multiple-choice test on-line using a computer by the specified date and time as instructed will not be considered further in this examination. Additional test dates may be added as needed. For detailed Information regarding the process for completing the multiple-choice test on-line, visit https://per.lacity.org/jobs/online-testing/remote-proctored.html . Due to COVID-19 and social distancing requirements, only candidates who demonstrate a hardship may be offered the option to take the multiple-choice test onsite at a City facility. SCORE BANDING The scores in the multiple-choice test will be reported in bands that reflect candidates' performance in the multiple-choice test. Seniority credit for promotional candidates and veteran credit for open candidates who attain a final passing score will be added to the banded scores of each candidate. The specific range of each band will be determined by Personnel Department staff after the multiple-choice test is administered. Consideration will be given to the number of candidates taking the multiple-choice test and the existing and anticipated number of vacancies, such that there are a sufficient number of eligibles on the list to satisfy current and future vacancies for the next two years. Therefore, the Final General Average for the Underground Distribution Mechanic examination will consist of the banded score after adding seniority credits for promotional candidates or veteran credits for open candidates who attained a final passing score. General information regarding on-line testing can be obtained by going to https://per.lacity.org/jobs/online-testing.html . FAQs for on-line testing are available at https://per.lacity.org/faqs/employment-testing-process.html . NOTICE : Test dates may be postponed in order to help protect the safety of our candidates and prevent the spread of COVID-19. Candidates will receive an e-mail from the City of Los Angeles Personnel Department if the anticipated multiple-choice test dates are postponed. NOTES : This examination is based on a validation study, and as provided by Civil Service Commission Rule 4.20, the multiple-choice test will not be subject to candidate review. You may take the Underground Distribution Construction Mechanic multiple-choice test only once every 24 months under this bulletin. If you have taken the Underground Distribution Construction Mechanic multiple-choice test during an open filing period in the Personnel Department within the last 24 months under this bulletin, you may not file for this examination at this time. Based on City policy, before being hired in this position, you may be required to undergo a drug and alcohol-screening test. As a covered entity under the Fair Employment and Housing Act and Title II of the Americans with Disabilities Act, the City of Los Angeles does not discriminate on the basis of disability and upon request, will provide reasonable accommodations to ensure equal access to its programs, services, and activities. To request a disability accommodation, please complete the Disability Accommodation Form within 14 calendar days of the submittal of the City application. The Disability Accommodation Form can be obtained at http://per.lacity.org/exams/verify_disability.pdf .Applications are accepted subject to review to ensure that minimum qualifications are met. Candidates may be disqualified at any time if it is determined that they do not possess the minimum qualifications stated on this bulletin.The promotional list will ordinarily be used ahead of the open competitive list. However, if open competitive candidates receive a higher score, without military credits, than the highest available promotional candidate, after adding seniority credit at the rate of 0.25 of a point for each year of continuous classified City service, the Civil Service Commission, upon request of the appointing authority, may approve certification of such open competitive candidates ahead of the promotional candidates. A final average score of 70% is required to be placed on the eligible list.You must have received a regular appointment to a City position or be on a reserve list to file on a promotional basis.Your rank on the eligible list may change as scores of candidates from other administrations of this examination are merged onto one list.In conjunction with Civil Service Rules, applicants who have received a regular appointment to a City position or are on a reserve list will be considered Promotional candidates while all other applicants will be considered Open candidates.In accordance with Civil Service Rule, Sec. 4.24, review periods may be combined. Candidates in the examination process may file protests as provided in Sec. 4.20, 4.22 and 4.23 as applicable and within the required time frame; however, the Personnel Department may respond to and resolve protests prior to the establishment of the eligible list.For candidates seeking initial City employment, in accordance with Los Angeles City Ordinance 187134, information regarding COVID-19 vaccination requirements as conditions of employment may be found at: https://clkrep.lacity.org/onlinedocs/2021/21-0921_ord_187134_8-24-21.pdf . Notice : If you receive and accept an offer of employment to a regular position with the City of Los Angeles, your employee benefit coverage (including health and dental coverage as well as life insurance) will commence approximately six weeks after your original regular appointment. Not all positions in the City receive benefit coverage; you should inquire regarding the availability of employee benefits prior to accepting a position. All City employees are required to be Disaster Service Workers. THIS EXAMINATION IS TO BE GIVEN BOTH ON AN INTERDEPARTMENTAL PROMOTIONAL AND OPEN COMPETITIVE BASIS The City of Los Angeles does not discriminate on the basis of race, religion, national origin, sex, age, marital status, sexual orientation, gender identity, gender expression, disability, creed, color, ancestry, medical condition (cancer), or Acquired Immune Deficiency Syndrome. AN EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER For additional information and FAQs regarding the City's hiring process, please go to: https://per.lacity.org/faqs/employment-testing-process.html There are many things to consider in a new employer. Visit the following webpage to view benefits the City of Los Angeles offers its employees: http://per.lacity.org/bens/index.html Closing Date/Time:
King County, WA
Seattle, Washington, United States
Summary First consideration is given to SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for experienced and technically proficient Industrial Maintenance Mechanic at our West Point Treatment Plant. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Skill in installing, pulling, soldering, splicing, and terminating wire. Skill in working with variable frequency (speed) drives, installation, programming, maintenance, and repair. Skill in creating or modifying new or existing technical publications and electrical drawings. Skill in applying industry codes and guidelines in the design, installation, and maintenance of plant electrical equipment. Skill in performing basic mathematics functions including algebra and trigonometry. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : West Point Treatment Plant - 1400 Discovery Park Blvd. Seattle, WA 98199 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: This is a transfer opportunity, and first consideration will be given to qualified S.E.I.U. 925 WTD applicants. We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Angelia Remolana, HR Analyst at anremolana@kingcounty.gov . Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
May 07, 2024
Full Time
Summary First consideration is given to SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for experienced and technically proficient Industrial Maintenance Mechanic at our West Point Treatment Plant. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Skill in installing, pulling, soldering, splicing, and terminating wire. Skill in working with variable frequency (speed) drives, installation, programming, maintenance, and repair. Skill in creating or modifying new or existing technical publications and electrical drawings. Skill in applying industry codes and guidelines in the design, installation, and maintenance of plant electrical equipment. Skill in performing basic mathematics functions including algebra and trigonometry. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : West Point Treatment Plant - 1400 Discovery Park Blvd. Seattle, WA 98199 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: This is a transfer opportunity, and first consideration will be given to qualified S.E.I.U. 925 WTD applicants. We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Angelia Remolana, HR Analyst at anremolana@kingcounty.gov . Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
TEXAS PARKS AND WILDLIFE
Austin, Texas, United States
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty HVAC Mechanic I - III Army 91C HVAC Mechanic I - III Navy EN, MM, UT HVAC Mechanic I - III Coast Guard MK HVAC Mechanic I - III Marine Corps 1161, 6073, 6499 HVAC Mechanic I - III Air Force 3E1X1 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Phillip Torres, (512) 389-8050 PHYSICAL WORK ADDRESS: TPWD Headquarters, 4200 Smith School Road, Austin, TX 78744 GENERAL DESCRIPTION Under the direction of the Facility Manager, this position performs advanced (senior level) heating, ventilation, and air conditioning (HVAC) mechanic work for equipment to ensure effective operation. Overhauls, services or oversees the overhauling and servicing of HVAC and mechanical equipment. Performs advanced HVAC mechanic work by assigning, scheduling, or overseeing the work of staff engaged in the maintenance and repair mechanical systems, HVAC equipment, high pressure power boilers, large centrifugal refrigeration chillers, screw chiller and components such as condensers, chillers, cooling towers, pumps, and valves. Air Quality and Control Administers and maintains HQ facilities HVAC equipment and controls. Makes technical / troubleshooting to building management systems. Recommends solutions to improve efficiency, improve air quality, and comfort within office environments. Building Management system administers computer HVAC and building management systems, maintaining system operation from facility and by remote. Monitors the operation of HVAC system's, making modifications and adjustments. Works under limited supervision, with moderate latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division, and Branch rules, regulations, and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Three years' experience in maintaining, troubleshooting, repairing, contracting, and operating HVAC systems in a large commercial or industrial setting; Three years' experience using and operating Building Automated Controls; Three years' plumbing experience; Three years' commercial electrical experience. Licensure: Must possess EPA universal Certification; Must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license. NOTE: Retention of position contingent upon obtaining and maintaining required licenses. ACCEPTABLE SUBSTITUTIONS: Experience: Completion of a 5-year apprenticeship program, including receipt of Journeyman certification, may substitute for three years commercial HVAC Mechanical experience. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of commercial HVAC systems; Knowledge of electrical low voltage control circuits; Knowledge of energy efficiency in HVAC system operations; Knowledge of HVAC capital construction and improvement projects; Knowledge of preventative maintenance programs; Knowledge of single phase and three phase electrical commercial system; Knowledge of refrigeration systems (Ice Machines, Water fountains); Knowledge of Air Quality Control; Knowledge of Chiller systems; Knowledge of Boiler systems ; Skill in operating automated building controls associated with HVAC systems in a commercial building; Skill in maintaining, troubleshooting, and repairing commercial roof top units and split systems; Skill in wiring duct smoke detectors; Skill in operating and maintaining 300-ton chillers, cooling towers, and gas fired boilers; Skill in operating and maintaining pumps, motors, and automated controls; Skill in operating, calibrating, and replacing high and low voltage controls and other related control sensing instruments and equipment; Skill in using MS Word, Excel and Outlook; Skill in effective verbal and written communication; Skill in providing quality customer service in a courteous and professional manner; Skill in using digital test instruments required for maintenance and repair; Skill in low voltage (24V or 1 to 10V) associated with HVAC equipment, Air Handling equipment, and duct systems associated with HVAC equipment; Skill in commercial electrical systems; Skill in maintaining, diagnose, and repair of refrigeration equipment. (Ice Machines, Water Fountains); Ability to read and comprehend blueprints, write job specifications and service agreements, project cost analysis, project management of service, construction, repair and maintenance jobs; Ability to replace and repair major components of AC and heating systems; Ability to coordinate contract repairs and manage contract service maintenance work for HVAC systems; Ability to inspect HVAC service and repairs contracts and contractors; Ability to maintain status and service records on specified equipment and compose memos and reports; Ability to interpret and work from blueprints and specifications on HVAC projects and equipment; Ability to lead and delegate a work group in repair and installation projects; Ability to perform frequent, proactive evaluation and resolution of facility air comfort and quality problems; Ability to implement new approaches in solving problems, following up and communicating with employees during and after modification; Ability to operate, maintain and train staff in HVAC and building management computer control systems, research and implement enhancements; Ability to compose reports and correspondence; Ability to work independently with little or no supervision; Ability to perform work at high altitudes; Ability to perform manual labor including, lifting supplies and materials up to 100 lbs.; Ability to conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work from 8:00 a.m. to 5:00 p.m., Monday through Friday; Required to work on holidays, weekends and hours other than 8:00 a.m. to 5:00 p.m. as necessary; Required to work overtime as necessary; Required to respond to emergency and on call situations; Required to perform work at high altitudes; Required to perform work outdoors, occasionally in adverse weather conditions; Required to perform manual labor including, lifting supplies and materials up to 100 lbs.; Required to travel 10%; Required to operate a State vehicle; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State buildings and vehicles. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: May 27, 2024, 11:59:00 PM
Apr 30, 2024
Full Time
TPWD MISSION To manage and conserve the natural and cultural resources of Texas and to provide hunting, fishing and outdoor recreation opportunities for the use and enjoyment of present and future generations. PLEASE NOTE: All applications must contain complete job histories, which includes job title, dates of employment (month/year) and hours worked per week, name of employer, supervisor's name and phone number and a description of duties performed. Job history and volunteer experience should be listed in the work history section of the application to receive credit towards meeting the minimum requirements. Part-time experience credit is prorated based on the duration and hours worked per week. Please indicate hours worked for part-time/temporary/seasonal experience. If this information is not submitted, your application will be considered incomplete. Applications with "See attached" or "See resume" will not be accepted in lieu of a completed application. Omission of data can be the basis for disqualification; you may state 'unknown' for any incomplete fields. If education is used to meet the minimum requirements of the job posting, a copy of a college transcript(s) issued from the registrar must be provided if you are selected for an interview. WATCH OUR VIDEO ON HOW TO APPLY FOR JOBS APPLICATIONS SUBMITTED THROUGH WORK IN TEXAS: Work In Texas (WIT) applicants must complete the supplemental questions to be considered for the posting. To complete the supplemental questions, go to CAPPS Recruit to register or login. CAPPS Recruit, https://capps.taleo.net/careersection/ex/jobsearch.ftl?lang=en MILITARY OCCUPATIONAL SPECIALTY CODES: Job Classification Service Military Specialty HVAC Mechanic I - III Army 91C HVAC Mechanic I - III Navy EN, MM, UT HVAC Mechanic I - III Coast Guard MK HVAC Mechanic I - III Marine Corps 1161, 6073, 6499 HVAC Mechanic I - III Air Force 3E1X1 *More information on military occupational specialty codes can be found below: https://www.onetonline.org/crosswalk/MOC/ https://hr.sao.texas.gov/Compensation/MilitaryCrosswalk/MilitaryCrosswalkGuide.pdf MILITARY EMPLOYMENT PREFERENCE: If you choose to claim military employment preference as outlined by the State of Texas, you must complete the Military Employment Preference Survey and attach this form and required documentation referenced on this form at the time your application is submitted . If you have questions regarding this requirement, please visit our Military Employment Reference page at https://tpwd.texas.gov/jobs/veterans/ Required forms that will need to be attached with application for Military Employment Preference: 1. Veteran- DD214 showing honorable discharge. 2. Surviving spouse of a veteran who has not remarried- Marriage Certificate and DD Form 1300 or appropriate documentation. 3. Orphan of a veteran killed while on active duty- Birth Certificate and DD Form 1300 or appropriate documentation. 4. Spouse of a member of the US Armed Forces/Texas National Guard serving on Active Duty- Marriage Certificate and copy of spouses active duty military orders. 5. Spouse of a veteran with disability and is the primary income for household- Marriage Certificate, Veterans DD214, and VA Benefits Summary Letter showing disability rating. Documentation must be attached to the application before military preference can be granted. BENEFITS: Texas Parks and Wildlife offers a variety of benefits for employees such as generous paid time off, group insurance, retirement and pension, and frequent training and staff development opportunities. Other benefits include longevity pay, merit pay, deferred compensation, flexible benefit plans, 401K/457 retirement plans, direct deposit, telework, staggered work hours, Employee Assistance Program and a Return to Work Program. For new employees or rehires, health insurance is available the 1st of the following month after a 60-day waiting period. Click HERE to view our Benefits page. HIRING CONTACT: Phillip Torres, (512) 389-8050 PHYSICAL WORK ADDRESS: TPWD Headquarters, 4200 Smith School Road, Austin, TX 78744 GENERAL DESCRIPTION Under the direction of the Facility Manager, this position performs advanced (senior level) heating, ventilation, and air conditioning (HVAC) mechanic work for equipment to ensure effective operation. Overhauls, services or oversees the overhauling and servicing of HVAC and mechanical equipment. Performs advanced HVAC mechanic work by assigning, scheduling, or overseeing the work of staff engaged in the maintenance and repair mechanical systems, HVAC equipment, high pressure power boilers, large centrifugal refrigeration chillers, screw chiller and components such as condensers, chillers, cooling towers, pumps, and valves. Air Quality and Control Administers and maintains HQ facilities HVAC equipment and controls. Makes technical / troubleshooting to building management systems. Recommends solutions to improve efficiency, improve air quality, and comfort within office environments. Building Management system administers computer HVAC and building management systems, maintaining system operation from facility and by remote. Monitors the operation of HVAC system's, making modifications and adjustments. Works under limited supervision, with moderate latitude for the use of initiative and independent judgment. Performs additional duties as assigned. Complies with all Agency, Division, and Branch rules, regulations, and procedures. Qualifications: MINIMUM QUALIFICATIONS: Education: Graduation from High School or GED. Experience: Three years' experience in maintaining, troubleshooting, repairing, contracting, and operating HVAC systems in a large commercial or industrial setting; Three years' experience using and operating Building Automated Controls; Three years' plumbing experience; Three years' commercial electrical experience. Licensure: Must possess EPA universal Certification; Must possess or be able to obtain, within 30 days of employment, a valid class "C" Texas driver's license. NOTE: Retention of position contingent upon obtaining and maintaining required licenses. ACCEPTABLE SUBSTITUTIONS: Experience: Completion of a 5-year apprenticeship program, including receipt of Journeyman certification, may substitute for three years commercial HVAC Mechanical experience. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of commercial HVAC systems; Knowledge of electrical low voltage control circuits; Knowledge of energy efficiency in HVAC system operations; Knowledge of HVAC capital construction and improvement projects; Knowledge of preventative maintenance programs; Knowledge of single phase and three phase electrical commercial system; Knowledge of refrigeration systems (Ice Machines, Water fountains); Knowledge of Air Quality Control; Knowledge of Chiller systems; Knowledge of Boiler systems ; Skill in operating automated building controls associated with HVAC systems in a commercial building; Skill in maintaining, troubleshooting, and repairing commercial roof top units and split systems; Skill in wiring duct smoke detectors; Skill in operating and maintaining 300-ton chillers, cooling towers, and gas fired boilers; Skill in operating and maintaining pumps, motors, and automated controls; Skill in operating, calibrating, and replacing high and low voltage controls and other related control sensing instruments and equipment; Skill in using MS Word, Excel and Outlook; Skill in effective verbal and written communication; Skill in providing quality customer service in a courteous and professional manner; Skill in using digital test instruments required for maintenance and repair; Skill in low voltage (24V or 1 to 10V) associated with HVAC equipment, Air Handling equipment, and duct systems associated with HVAC equipment; Skill in commercial electrical systems; Skill in maintaining, diagnose, and repair of refrigeration equipment. (Ice Machines, Water Fountains); Ability to read and comprehend blueprints, write job specifications and service agreements, project cost analysis, project management of service, construction, repair and maintenance jobs; Ability to replace and repair major components of AC and heating systems; Ability to coordinate contract repairs and manage contract service maintenance work for HVAC systems; Ability to inspect HVAC service and repairs contracts and contractors; Ability to maintain status and service records on specified equipment and compose memos and reports; Ability to interpret and work from blueprints and specifications on HVAC projects and equipment; Ability to lead and delegate a work group in repair and installation projects; Ability to perform frequent, proactive evaluation and resolution of facility air comfort and quality problems; Ability to implement new approaches in solving problems, following up and communicating with employees during and after modification; Ability to operate, maintain and train staff in HVAC and building management computer control systems, research and implement enhancements; Ability to compose reports and correspondence; Ability to work independently with little or no supervision; Ability to perform work at high altitudes; Ability to perform manual labor including, lifting supplies and materials up to 100 lbs.; Ability to conduct work activities in accordance with TPWD safety program. WORKING CONDITIONS: Required to work from 8:00 a.m. to 5:00 p.m., Monday through Friday; Required to work on holidays, weekends and hours other than 8:00 a.m. to 5:00 p.m. as necessary; Required to work overtime as necessary; Required to respond to emergency and on call situations; Required to perform work at high altitudes; Required to perform work outdoors, occasionally in adverse weather conditions; Required to perform manual labor including, lifting supplies and materials up to 100 lbs.; Required to travel 10%; Required to operate a State vehicle; Must conform to TPWD dress and grooming standards, work rules and safety procedures; Non-smoking environment in State buildings and vehicles. TPWD IS AN EQUAL OPPORTUNITY EMPLOYER Closing Date: May 27, 2024, 11:59:00 PM
Summary First consideration is given to qualified SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for 5 experienced and technically proficient Industrial Maintenance Mechanics at our South (4 positions) and Brightwater (1 position) Treatment Plants. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 or Brightwater Treatment Plant - 22505 WA-9, Woodinville, WA 98072 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
Apr 06, 2024
Part Time
Summary First consideration is given to qualified SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for 5 experienced and technically proficient Industrial Maintenance Mechanics at our South (4 positions) and Brightwater (1 position) Treatment Plants. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 or Brightwater Treatment Plant - 22505 WA-9, Woodinville, WA 98072 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
HOUSTON AIRPORT SYSTEM
Houston, Texas, United States
POSITION OVERVIEW Applications will be accepted from: All Persons Interested Division/ Section: Bush Intercontinental Airport / General Maintenance Services Workdays & Hours: * Varied (Shift work, including rotation, weekends and holidays) subject to change* PURPOSE OF DIVISION The purpose of the Houston Airports (HAS) General Maintenance Services Division is to effectively deliver self-performed, and contracted, maintenance services at each of the three HAS airports. PURPOSE OF THE POSITION The purpose of the Maintenance Mechanic III position is to prevent mechanical failure of equipment, to identify and correct safety hazards, and inspect, repair, clean and maintain several types of equipment: pumps, miscellaneous rotating and reciprocating equipment, plumbing equipment (sinks, commodes, urinals, flush valves, and faucets) and machinery throughout the airport complex. This position may be assigned duties at all Houston Airport System facilities including IAH, HOU, and EFD. "Must be able to pass a criminal background check, obtain and maintain federally mandated security clearances where required." The Maintenance Mechanic III duties will include but are not limited to: Installs mechanical equipment and components. Repairs, refurbishes and maintains several types of pumps (i.e. hydraulic, oil, gas, diesel) and miscellaneous rotating and reciprocating equipment and machinery. Operates vehicles to and from work sites. Repairs and maintains equipment and parts. Practices equipment and parts conservation. Performs additional maintenance activities such as painting, a/c repairs, carpentry, carpet, plumbing, concrete and roofing repairs as in general building maintenance. Rehabilitates and monitors equipment, facilities, and systems (i.e. elevators, escalators, automatic doors, ticket dispenser's electric gates, a/c and heating equipment). Provides preventive maintenance to equipment, buildings, facilities and systems. May lead and train lower level personnel. WORKING CONDITIONS The position involves considerable physical exertion, such as regular climbing of ladders, lifting of heavy objects (up to 80 pounds) on a highly frequent basis and/or assuming awkward positions for long periods of time. There are routine exposures to significant levels of heat, cold, moisture and air pollution. The position may involve periodic exposure to chemical substances and physical trauma of a minor nature such as cuts, bruises and minor burns. Requires the ability to make closely coordinated eye/hand movements within very fine tolerance and/or calibration demands; or the ability to make rapid closely coordinated eye/hand movements on a patterned response space within somewhat fine tolerance demands; or the ability to make coordinated eye/hand movements within fine tolerances with large equipment as an extension of the worker. Walking and standing for extended periods of time. Working rotation, weekends including holiday shifts. MINIMUM REQUIREMENTS EDUCATIONAL REQUIREMENTS Specialized training in principles, procedures, practices, routines or techniques in a specific area or trade which might normally be acquired through up to 18 months of Education or Training beyond the High School level. Vocational competence in the operation of Mechanical or Electronic equipment may be required. EXPERIENCE REQUIREMENTS One year of experience in building or mechanical maintenance is required. LICENSE REQUIREMENTS Must have a valid Texas driver's license and comply with the City of Houston's policy on driving. May require a valid Commercial Driver's License (CDL). PREFERENCES ****Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6.**** GENERAL INFORMATION SELECTION/SKILLS TESTS REQUIRED The selection process will involve application review and/or interview. Department may administer skills assessment test. SAFETY IMPACT POSITION YES - If yes, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. Pay Grade 14 SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov . To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call (281-233-1983). If you need login assistance or technical support call 855-524-5627. If you need special services or accommodations, call (281-233-1983). (TTY 7-1-1) Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. Applicants are encouraged to attach a cover letter and resume along with their completed application when applying. For further information pertaining to the Houston Airport System, please visit: https://www.youtube.com/watch?v=EDWLV_sJFoM . EOE Equal Opportunity Employment The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy. The city offers a competitive benefits program, including competitively priced health coverage and a defined contribution pension plan. Benefits include: • Medical • Dental • Vision • Wellness • Life insurance • Long-term disability • Retirement pension • 457 deferred compensation plan • Employee Assistance Program • 10 days of vacation each year • 11 city holidays, plus one floating holiday • Flexible schedules • Professional development opportunities • Transportation/parking plan • Section 125 pretax deductions • Dependent Care Reimbursement Plan • Healthcare Flexible Spending Account For plan details, visit http://www.houstontx.gov/hr/benefits.html Closing Date/Time: 5/20/2024 11:59 PM Central
May 08, 2024
Full Time
POSITION OVERVIEW Applications will be accepted from: All Persons Interested Division/ Section: Bush Intercontinental Airport / General Maintenance Services Workdays & Hours: * Varied (Shift work, including rotation, weekends and holidays) subject to change* PURPOSE OF DIVISION The purpose of the Houston Airports (HAS) General Maintenance Services Division is to effectively deliver self-performed, and contracted, maintenance services at each of the three HAS airports. PURPOSE OF THE POSITION The purpose of the Maintenance Mechanic III position is to prevent mechanical failure of equipment, to identify and correct safety hazards, and inspect, repair, clean and maintain several types of equipment: pumps, miscellaneous rotating and reciprocating equipment, plumbing equipment (sinks, commodes, urinals, flush valves, and faucets) and machinery throughout the airport complex. This position may be assigned duties at all Houston Airport System facilities including IAH, HOU, and EFD. "Must be able to pass a criminal background check, obtain and maintain federally mandated security clearances where required." The Maintenance Mechanic III duties will include but are not limited to: Installs mechanical equipment and components. Repairs, refurbishes and maintains several types of pumps (i.e. hydraulic, oil, gas, diesel) and miscellaneous rotating and reciprocating equipment and machinery. Operates vehicles to and from work sites. Repairs and maintains equipment and parts. Practices equipment and parts conservation. Performs additional maintenance activities such as painting, a/c repairs, carpentry, carpet, plumbing, concrete and roofing repairs as in general building maintenance. Rehabilitates and monitors equipment, facilities, and systems (i.e. elevators, escalators, automatic doors, ticket dispenser's electric gates, a/c and heating equipment). Provides preventive maintenance to equipment, buildings, facilities and systems. May lead and train lower level personnel. WORKING CONDITIONS The position involves considerable physical exertion, such as regular climbing of ladders, lifting of heavy objects (up to 80 pounds) on a highly frequent basis and/or assuming awkward positions for long periods of time. There are routine exposures to significant levels of heat, cold, moisture and air pollution. The position may involve periodic exposure to chemical substances and physical trauma of a minor nature such as cuts, bruises and minor burns. Requires the ability to make closely coordinated eye/hand movements within very fine tolerance and/or calibration demands; or the ability to make rapid closely coordinated eye/hand movements on a patterned response space within somewhat fine tolerance demands; or the ability to make coordinated eye/hand movements within fine tolerances with large equipment as an extension of the worker. Walking and standing for extended periods of time. Working rotation, weekends including holiday shifts. MINIMUM REQUIREMENTS EDUCATIONAL REQUIREMENTS Specialized training in principles, procedures, practices, routines or techniques in a specific area or trade which might normally be acquired through up to 18 months of Education or Training beyond the High School level. Vocational competence in the operation of Mechanical or Electronic equipment may be required. EXPERIENCE REQUIREMENTS One year of experience in building or mechanical maintenance is required. LICENSE REQUIREMENTS Must have a valid Texas driver's license and comply with the City of Houston's policy on driving. May require a valid Commercial Driver's License (CDL). PREFERENCES ****Preference shall be given to eligible veteran applicants provided such persons possess the qualifications necessary for competent discharge of the duties involved in the position applied for, such persons are among the most qualified candidates for the position, and all other factors in accordance with Executive Order 1-6.**** GENERAL INFORMATION SELECTION/SKILLS TESTS REQUIRED The selection process will involve application review and/or interview. Department may administer skills assessment test. SAFETY IMPACT POSITION YES - If yes, this position is subject to random drug testing and if a promotional position, candidate must pass an assignment drug test. Pay Grade 14 SALARY INFORMATION Factors used in determining the salary offered include the candidate's qualifications as well as the pay rates of other employees in this classification. APPLICATION PROCEDURES Only online applications will be accepted for this City of Houston job and must be received by the Human Resources Department during active posting period. Applications must be submitted online at: www.houstontx.gov . To view your detailed application status, please log-in to your online profile by visiting: http://agency.governmentjobs.com/houston/default.cfm or call (281-233-1983). If you need login assistance or technical support call 855-524-5627. If you need special services or accommodations, call (281-233-1983). (TTY 7-1-1) Due to the high volume of applications received, the Hiring Department will contact you directly, should you be selected to advance in our recruitment process. All new and rehires must pass a pre-employment drug test and are subject to a physical examination and verification of information provided. Applicants are encouraged to attach a cover letter and resume along with their completed application when applying. For further information pertaining to the Houston Airport System, please visit: https://www.youtube.com/watch?v=EDWLV_sJFoM . EOE Equal Opportunity Employment The City of Houston is committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, genetic information, veteran status, gender identity, or pregnancy. The city offers a competitive benefits program, including competitively priced health coverage and a defined contribution pension plan. Benefits include: • Medical • Dental • Vision • Wellness • Life insurance • Long-term disability • Retirement pension • 457 deferred compensation plan • Employee Assistance Program • 10 days of vacation each year • 11 city holidays, plus one floating holiday • Flexible schedules • Professional development opportunities • Transportation/parking plan • Section 125 pretax deductions • Dependent Care Reimbursement Plan • Healthcare Flexible Spending Account For plan details, visit http://www.houstontx.gov/hr/benefits.html Closing Date/Time: 5/20/2024 11:59 PM Central
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
May 17, 2024
Full Time
Posting Open Until Filled Salary Range: $35,350 - $44,241 GENERAL DESCRIPTION AND CLASSIFIACTION STANDARDS Maintains assigned City of Atlanta facilities to maximize operational performance and reduce equipment operating costs. Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility. On call for after-hour facility emergencies. SUPERVISION RECEIVED Works under the direction of the Facilities Maintenance Supervisor. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned facility tasks. ESSENTIAL DUTIES & RESPONSIBILITIES Performs scheduled preventive, predictive, corrective and reactive maintenance on facility assets as assigned. Leads continuous improvement activities. Participates in Root-Cause Analysis activities. Utilizes Computerized Maintenance Management System (CMMS) to document work orders and maintain work history. Performs general repairs and maintenance not limited to: Repairs or adjusts doors, carpentry, painting, replacing light bulbs or fixtures, repairs to plumbing/pipes/sinks, and HVAC. Organizes daily work routine; establishes priorities for the completion of work in accordance with facility needs. Utilizes experience to lead in developing standards/work procedures while performing those duties and provides work order feedback on discrepancies as noted during service delivery. Uses a variety of hand-powered and shop tools. Complies with safety regulations and maintains clean and orderly work areas. Helps and trains new personnel on equipment operation. Performs all duties with a strong and diligent focus on safety and quality. Responds to customer requests and complaints in a timely and appropriate manner; identifies and records needs or problems and determines best approach to resolve situation following departmental guidelines. Responds to emergency situations during and after hours for the purpose of resolving immediate safety/operational concerns. Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. MINIMUNM QUALIFICATIONS A high school diploma Five plus (5+) years of experience in building repairs and maintenance. Trade proficiency in basic plumbing, simple electrical, carpentry, drywall, tile, flooring, painting, miscellaneous repairs and maintenance. Must have a valid Georgia Driver's license PREFERRED QUALIFICATIONS Building Operators Certification (BOC) Building Owners and Managers Association (BOMA) Certification International Facility Management Association (IFMA) Certification HVAC Certification PHYSICAL REQUIREMENTS Frequent standing & walking; occasional sitting; Physical demands may vary depending on assigned work area and work tasks. Carrying of objects up to 35 lbs; The ability to lift 50 pounds and bending, k neeling, stooping, and twisting, is frequently required.
CITY OF ATLANTA, GA
College Park, Georgia, United States
Hourly range: $17.26-$25.92 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Create and pull work orders for CMMS system. Pick up FOD / Trash to include entire airport property. Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Striping and marking roadways and ramp areas Knowledge In depth knowledge of landscaping and landscaping equipment. Ability to inspect and operate landscaping equipment to include commercial grade vehicles, tractors with mowing decks, zero turns, and all hand held motorized landscaping equipment. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
Mar 08, 2024
Full Time
Hourly range: $17.26-$25.92 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Create and pull work orders for CMMS system. Pick up FOD / Trash to include entire airport property. Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Striping and marking roadways and ramp areas Knowledge In depth knowledge of landscaping and landscaping equipment. Ability to inspect and operate landscaping equipment to include commercial grade vehicles, tractors with mowing decks, zero turns, and all hand held motorized landscaping equipment. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
SAN BERNARDINO COUNTY, CA
Needles, California, United States
The Job The Fleet Management Department is recruiting for Lead Fleet Technicians who perform skilled repair and maintenance work on gasoline and diesel powered automobiles, trucks, construction, and other equipment. Duties include scheduling, assigning, and reviewing work of skilled mechanics and other workers engaged in the maintenance repair, modification and fabrication of fleet equipment. Immediate vacancy exists in NEEDLES . This recruitment is for the NEEDLES location only . Vacancies also exists in Barstow, Twentynine Palms, and San Bernardino. A separate application is required. For a more detailed information, review the Lead Fleet Technician job description. CONDITIONS OF EMPLOYMENT Pre-Employment Process: Incumbents must successfully complete a background check and medical exam prior to appointment. Physical: Incumbents must be physically able to lift fifty (50) pounds, stand, bend, squat, kneel, twist, turn, and stoop. Employees work outside continuously and are exposed to electricity, chemicals, heat, oil, odors, dust, gas, and noise. Tools: Incumbents must possess their own hand tools to perform the duties of this position. An annual tool allowance of $500 is provided on July 1st. Shift: Incumbents may be required to work day, evening, or night shifts, to meet departmental needs. License: At time of hire incumbents must possess a valid California Class C driver license and proof of automobile liability insurance must be produced and maintained for the individual providing the transportation. Incumbents must also obtain and maintain a valid California Class B driver license within six (6) months of hire in order to meet probationary standards. Indicate CA license number, class, and expiration date on the Application and Supplemental Questionnaire. Sponsorship: San Bernardino County is unable to consider to candidates who require Visa Sponsorship at this time or in the future. Candidates must be able to present their legal right to work in the United States at the time of employment. Minimum Requirements Experience: Three (3) years of paid work experience as a journey-level automotive and/or diesel mechanic, repairing and maintaining automobiles, trucks, heavy construction equipment and/or standby generators, including: transmissions, air conditioning, cooling systems, electrical systems, brake systems, hydraulic systems, fuel injection systems, pollution control devices, wheel alignment systems, and engine overhauls. Desired Qualifications The ideal candidate possess ASE and Vehicle Manufacturer Certifications, as well as extensive experience in repairing both gasoline and diesel equipment. Lead/Supervisory experience and an Associate's degree or higher in Automotive or related field is also desirable . Selection Process There will be a competitive evaluation of qualifications based on a review of the application and supplemental questionnaire. It is to your advantage to be explicit in your responses on the application and supplemental questionnaire. Application Procedure : To be considered for this excellent opportunity, please complete and submit the online employment application and supplemental questionnaire as soon as possible. This recruitment is continuous and can close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application before the posted filing deadline. Applicants will be automatically logged-out if they have not submitted the application and all required materials prior to the posted deadline. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you require technical assistance , please click HERE to review the Government Jobs online application guide , or contact their Toll-Free Applicant Support line at (855) 524-5627. Please note that Human Resources is not responsible for any issues or delays caused by the internet connection, computer or browser used to submit the application. EEO/ADA: San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, committed to providing equal employment opportunity to all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, submit the Special Testing Accommodations Request Form within one week of a recruitment filing deadline. Veterans’ Preference: Eligible veterans and their spouse or widow(er) who are not current County employees may be awarded additional Veterans’ Preference points. Click here for information and instructions to request Veteran's Preference points. Click HERE for important Applicant Information and the County Employment Process . Craft, Labor &Trades Unit The County of San Bernardino offers a range of benefit programs for employees and their eligible dependents. These include health, dental, vision, and life insurance, as well as a variety of voluntary benefits. Programs and benefit amounts vary and are based on bargaining unit, family size, hire date, plan selection, and number of hours worked. For a summary of benefits, please click here . Refer to the appropriate MOU, contact the County's Employee Benefits and Services Division at (909) 387-5787 or visit the Benefits website for more detailed information at hr.sbcounty.gov/employee-benefits/ . Closing Date/Time: Continuous
Mar 08, 2024
Full Time
The Job The Fleet Management Department is recruiting for Lead Fleet Technicians who perform skilled repair and maintenance work on gasoline and diesel powered automobiles, trucks, construction, and other equipment. Duties include scheduling, assigning, and reviewing work of skilled mechanics and other workers engaged in the maintenance repair, modification and fabrication of fleet equipment. Immediate vacancy exists in NEEDLES . This recruitment is for the NEEDLES location only . Vacancies also exists in Barstow, Twentynine Palms, and San Bernardino. A separate application is required. For a more detailed information, review the Lead Fleet Technician job description. CONDITIONS OF EMPLOYMENT Pre-Employment Process: Incumbents must successfully complete a background check and medical exam prior to appointment. Physical: Incumbents must be physically able to lift fifty (50) pounds, stand, bend, squat, kneel, twist, turn, and stoop. Employees work outside continuously and are exposed to electricity, chemicals, heat, oil, odors, dust, gas, and noise. Tools: Incumbents must possess their own hand tools to perform the duties of this position. An annual tool allowance of $500 is provided on July 1st. Shift: Incumbents may be required to work day, evening, or night shifts, to meet departmental needs. License: At time of hire incumbents must possess a valid California Class C driver license and proof of automobile liability insurance must be produced and maintained for the individual providing the transportation. Incumbents must also obtain and maintain a valid California Class B driver license within six (6) months of hire in order to meet probationary standards. Indicate CA license number, class, and expiration date on the Application and Supplemental Questionnaire. Sponsorship: San Bernardino County is unable to consider to candidates who require Visa Sponsorship at this time or in the future. Candidates must be able to present their legal right to work in the United States at the time of employment. Minimum Requirements Experience: Three (3) years of paid work experience as a journey-level automotive and/or diesel mechanic, repairing and maintaining automobiles, trucks, heavy construction equipment and/or standby generators, including: transmissions, air conditioning, cooling systems, electrical systems, brake systems, hydraulic systems, fuel injection systems, pollution control devices, wheel alignment systems, and engine overhauls. Desired Qualifications The ideal candidate possess ASE and Vehicle Manufacturer Certifications, as well as extensive experience in repairing both gasoline and diesel equipment. Lead/Supervisory experience and an Associate's degree or higher in Automotive or related field is also desirable . Selection Process There will be a competitive evaluation of qualifications based on a review of the application and supplemental questionnaire. It is to your advantage to be explicit in your responses on the application and supplemental questionnaire. Application Procedure : To be considered for this excellent opportunity, please complete and submit the online employment application and supplemental questionnaire as soon as possible. This recruitment is continuous and can close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application before the posted filing deadline. Applicants will be automatically logged-out if they have not submitted the application and all required materials prior to the posted deadline. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you require technical assistance , please click HERE to review the Government Jobs online application guide , or contact their Toll-Free Applicant Support line at (855) 524-5627. Please note that Human Resources is not responsible for any issues or delays caused by the internet connection, computer or browser used to submit the application. EEO/ADA: San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, committed to providing equal employment opportunity to all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, submit the Special Testing Accommodations Request Form within one week of a recruitment filing deadline. Veterans’ Preference: Eligible veterans and their spouse or widow(er) who are not current County employees may be awarded additional Veterans’ Preference points. Click here for information and instructions to request Veteran's Preference points. Click HERE for important Applicant Information and the County Employment Process . Craft, Labor &Trades Unit The County of San Bernardino offers a range of benefit programs for employees and their eligible dependents. These include health, dental, vision, and life insurance, as well as a variety of voluntary benefits. Programs and benefit amounts vary and are based on bargaining unit, family size, hire date, plan selection, and number of hours worked. For a summary of benefits, please click here . Refer to the appropriate MOU, contact the County's Employee Benefits and Services Division at (909) 387-5787 or visit the Benefits website for more detailed information at hr.sbcounty.gov/employee-benefits/ . Closing Date/Time: Continuous
SAN BERNARDINO COUNTY, CA
29 Palms, California, United States
The Job The Fleet Management Department is recruiting for Lead Fleet Technicians who perform skilled repair and maintenance work on gasoline and diesel powered automobiles, trucks, construction, and other equipment. Duties include scheduling, assigning, and reviewing work of skilled mechanics and other workers engaged in the maintenance repair, modification and fabrication of fleet equipment. Immediate vacancy exists in TWENTYNINE PALMS . This recruitment is for the TWENTYNINE PALMS location only . Vacancies also exists in Barstow, Needles, and San Bernardino. A separate application is required. For a more detailed information, review the Lead Fleet Technician job description. CONDITIONS OF EMPLOYMENT Pre-Employment Process: Incumbents must successfully complete a background check and medical exam prior to appointment. Physical: Incumbents must be physically able to lift fifty (50) pounds, stand, bend, squat, kneel, twist, turn, and stoop. Employees work outside continuously and are exposed to electricity, chemicals, heat, oil, odors, dust, gas, and noise. Tools: Incumbents must possess their own hand tools to perform the duties of this position. An annual tool allowance of $500 is provided on July 1st. Shift: Incumbents may be required to work day, evening, or night shifts, to meet departmental needs. License: At time of hire incumbents must possess a valid California Class C driver license and proof of automobile liability insurance must be produced and maintained for the individual providing the transportation. Incumbents must also obtain and maintain a valid California Class B driver license within six (6) months of hire in order to meet probationary standards. Indicate CA license number, class, and expiration date on the Application and Supplemental Questionnaire. Sponsorship: San Bernardino County is unable to consider to candidates who require Visa Sponsorship at this time or in the future. Candidates must be able to present their legal right to work in the United States at the time of employment. Minimum Requirements Experience: Three (3) years of paid work experience as a journey-level automotive and/or diesel mechanic, repairing and maintaining automobiles, trucks, heavy construction equipment and/or standby generators, including: transmissions, air conditioning, cooling systems, electrical systems, brake systems, hydraulic systems, fuel injection systems, pollution control devices, wheel alignment systems, and engine overhauls. Desired Qualifications The ideal candidate possess ASE and Vehicle Manufacturer Certifications, as well as extensive experience in repairing both gasoline and diesel equipment. Lead/Supervisory experience and an Associate's degree or higher in Automotive or related field is also desirable . Selection Process There will be a competitive evaluation of qualifications based on a review of the application and supplemental questionnaire. It is to your advantage to be explicit in your responses on the application and supplemental questionnaire. Application Procedure : To be considered for this excellent opportunity, please complete and submit the online employment application and supplemental questionnaire as soon as possible. This recruitment is continuous and can close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application before the posted filing deadline. Applicants will be automatically logged-out if they have not submitted the application and all required materials prior to the posted deadline. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you require technical assistance , please click HERE to review the Government Jobs online application guide , or contact their Toll-Free Applicant Support line at (855) 524-5627. Please note that Human Resources is not responsible for any issues or delays caused by the internet connection, computer or browser used to submit the application. EEO/ADA: San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, committed to providing equal employment opportunity to all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, submit the Special Testing Accommodations Request Form within one week of a recruitment filing deadline. Veterans’ Preference: Eligible veterans and their spouse or widow(er) who are not current County employees may be awarded additional Veterans’ Preference points. Click here for information and instructions to request Veteran's Preference points. Click HERE for important Applicant Information and the County Employment Process . Craft, Labor &Trades Unit The County of San Bernardino offers a range of benefit programs for employees and their eligible dependents. These include health, dental, vision, and life insurance, as well as a variety of voluntary benefits. Programs and benefit amounts vary and are based on bargaining unit, family size, hire date, plan selection, and number of hours worked. For a summary of benefits, please click here . Refer to the appropriate MOU, contact the County's Employee Benefits and Services Division at (909) 387-5787 or visit the Benefits website for more detailed information at hr.sbcounty.gov/employee-benefits/ . Closing Date/Time: Continuous
Mar 08, 2024
Full Time
The Job The Fleet Management Department is recruiting for Lead Fleet Technicians who perform skilled repair and maintenance work on gasoline and diesel powered automobiles, trucks, construction, and other equipment. Duties include scheduling, assigning, and reviewing work of skilled mechanics and other workers engaged in the maintenance repair, modification and fabrication of fleet equipment. Immediate vacancy exists in TWENTYNINE PALMS . This recruitment is for the TWENTYNINE PALMS location only . Vacancies also exists in Barstow, Needles, and San Bernardino. A separate application is required. For a more detailed information, review the Lead Fleet Technician job description. CONDITIONS OF EMPLOYMENT Pre-Employment Process: Incumbents must successfully complete a background check and medical exam prior to appointment. Physical: Incumbents must be physically able to lift fifty (50) pounds, stand, bend, squat, kneel, twist, turn, and stoop. Employees work outside continuously and are exposed to electricity, chemicals, heat, oil, odors, dust, gas, and noise. Tools: Incumbents must possess their own hand tools to perform the duties of this position. An annual tool allowance of $500 is provided on July 1st. Shift: Incumbents may be required to work day, evening, or night shifts, to meet departmental needs. License: At time of hire incumbents must possess a valid California Class C driver license and proof of automobile liability insurance must be produced and maintained for the individual providing the transportation. Incumbents must also obtain and maintain a valid California Class B driver license within six (6) months of hire in order to meet probationary standards. Indicate CA license number, class, and expiration date on the Application and Supplemental Questionnaire. Sponsorship: San Bernardino County is unable to consider to candidates who require Visa Sponsorship at this time or in the future. Candidates must be able to present their legal right to work in the United States at the time of employment. Minimum Requirements Experience: Three (3) years of paid work experience as a journey-level automotive and/or diesel mechanic, repairing and maintaining automobiles, trucks, heavy construction equipment and/or standby generators, including: transmissions, air conditioning, cooling systems, electrical systems, brake systems, hydraulic systems, fuel injection systems, pollution control devices, wheel alignment systems, and engine overhauls. Desired Qualifications The ideal candidate possess ASE and Vehicle Manufacturer Certifications, as well as extensive experience in repairing both gasoline and diesel equipment. Lead/Supervisory experience and an Associate's degree or higher in Automotive or related field is also desirable . Selection Process There will be a competitive evaluation of qualifications based on a review of the application and supplemental questionnaire. It is to your advantage to be explicit in your responses on the application and supplemental questionnaire. Application Procedure : To be considered for this excellent opportunity, please complete and submit the online employment application and supplemental questionnaire as soon as possible. This recruitment is continuous and can close at any time. Resumes will not be accepted in lieu of the application and/or supplemental questionnaire. To ensure timely and successful submission of your online application, please allow ample time to complete and submit your application before the posted filing deadline. Applicants will be automatically logged-out if they have not submitted the application and all required materials prior to the posted deadline. Once your application has been successfully submitted you will receive an onscreen confirmation and an email. We recommend that you save and/or print these for your records. Please note, if you do not receive an onscreen confirmation and an email acknowledging our receipt of your application we have not received your application. If you require technical assistance , please click HERE to review the Government Jobs online application guide , or contact their Toll-Free Applicant Support line at (855) 524-5627. Please note that Human Resources is not responsible for any issues or delays caused by the internet connection, computer or browser used to submit the application. EEO/ADA: San Bernardino County is an Equal Employment Opportunity (EEO) and Americans with Disabilities Act (ADA) compliant employer, committed to providing equal employment opportunity to all employees and applicants. ADA Accommodation: If you have a disability and require accommodations in the testing process, submit the Special Testing Accommodations Request Form within one week of a recruitment filing deadline. Veterans’ Preference: Eligible veterans and their spouse or widow(er) who are not current County employees may be awarded additional Veterans’ Preference points. Click here for information and instructions to request Veteran's Preference points. Click HERE for important Applicant Information and the County Employment Process . Craft, Labor &Trades Unit The County of San Bernardino offers a range of benefit programs for employees and their eligible dependents. These include health, dental, vision, and life insurance, as well as a variety of voluntary benefits. Programs and benefit amounts vary and are based on bargaining unit, family size, hire date, plan selection, and number of hours worked. For a summary of benefits, please click here . Refer to the appropriate MOU, contact the County's Employee Benefits and Services Division at (909) 387-5787 or visit the Benefits website for more detailed information at hr.sbcounty.gov/employee-benefits/ . Closing Date/Time: Continuous
CITY OF ATLANTA, GA
College Park, Georgia, United States
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
May 11, 2024
Full Time
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
YORK COUNTY, SC
Anna K. Hubbard Fire Training Center, South Carolina, United States
About us York County is located in the Piedmont region, between the Broad River and the Catawba River. Its diverse landscape is home to family-friendly towns/cities, a progressive urban region and lakefront communities. We are excited that you want to join our team and recognize that our employees are the foundation for our success. Mission Statement - York County provides quality public services in an open, efficient, and responsive manner. Vision Statement - York County provides an environment where all citizens and businesses can thrive and succeed. About our opportunity York County Fire Services Department is excited to hire a full-time Fire Fabricator/Mechanic to join their team! The purpose of this position is to build/fabricate fire equipment and fire apparatuses, respond to work orders, trouble-shooting electrical, mechanical, and/or fabrication issues, and maintain fire apparatus and/or equipment on a daily basis. Projected Hiring Range: $24.18 - $30.22 per hour. Salary is based on qualifications. Work Schedule: Monday - Friday, 8:00 am -5:00 pm; hours may vary based on operational needs to include occasional evenings and weekends . Our Total Compensation Package: Compensation - competitive market-rate pay, and negotiable based on qualifications Comprehensive State Medical Insurance, Dental and Vision Insurance Life Insurance Long-term disability Deferred Compensation 401K Plans Health Savings Account (HSA) Public Loan Forgiveness Program (Student Loan Forgiveness Program) 11 Paid Holidays + 3 Optional Holidays Longevity Pay SC State Retirement Plan Pension Paid Vacation and Sick Time Sick Bank Critical Care and Cancer Insurance Wellness Screenings Employee Assistance Programs Professional Development / Trainings / Conferences Uniforms and all gear Duties and Responsibilities: Constructs fire apparatus, grass trucks, service trucks out of various metal materials primarily aluminum. Maintains fire equipment and/or apparatus. Trouble shoots electrical, mechanical issues with heavy machinery such as welders, metal shears, metal breaks, torches, fire engines, tankers, service trucks, grass trucks, etc. Receives and processes work orders, ensuring prompt response to both routine and emergency maintenance and repair requests; assists in scheduling tasks according to priority. Ability to drive county vehicles required to perform this required task. Repairs damaged vehicles. Fabricates shelves, exhaust, brackets to mount any device or equipment to an apparatus. Operates MIG, TIG, and ARC welders along with metal shears and a press brake. Pump tests fire engines to make sure they meet NFPA regulations. Maintains burn props for fire training. Makes repairs to building custom props. Uses blueprints or drawing to build, adjust, custom fit, alternate any type of equipment, tools, and fire vehicles. Performs related work as assigned. About you Education and Experience: High School Graduation or GED equivalent. Five (5) years of automotive repair and welding fabrication or an equivalent combination of education, training and experience. Certifications and Licenses: Must possess a valid state Commercial Driver’s License (CDL) Class B driver's license with appropriate endorsements. Class A is desired. Must possess and First Aid / CPR Certification and re-certify prior to expiration. Must possess Forklift Operators certification or the ability to obtain. A welding certification is desirable. Travel and Training: Numerous fire service-related training opportunities will be provided to gain specific manufacturer preferred training opportunities listed and at times may require (up to) air travel and extended stays out of state. Applicants with equivalent experience and/or education may be considered. Physical Demands / Work Environment / Disclaimer Physical Demands: Physical demands refer to the requirements for physical exertion and coordination of limb and body movement. Performs medium work that involves walking, standing, stooping, jumping, lifting, digging, pushing and raising objects and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis and 50 to 100 pounds of force on an occasional basis. Unavoidable Hazards (Work Environment): Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken. Involves routine and frequent exposure to: Bright/dim light; Dusts and pollen. Extreme heat and/or cold; Wet or humid conditions. Extreme noise levels, Animals/wildlife. Vibration; Fumes and/or noxious odors. Traffic; Moving machinery. Electrical shock; Heights. Radiation; Disease/pathogens. Americans with Disabilities Act Compliance: York County is an Equal Opportunity Employer. ADA requires the County to provide reasonable accommodations to qualified persons with disabilities. Prospective and current employees are encouraged to discuss ADA accommodations with management. Standard Clauses: May be required to work nights, weekends, holidays and emergencies (man-made or natural) to meet the business needs of the County. This job description is not designed to cover or contain a comprehensive listing of essential functions and responsibilities that are required of an employee for this job. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Closing Date/Time: 5/24/2024 5:00 PM Eastern
May 11, 2024
Full Time
About us York County is located in the Piedmont region, between the Broad River and the Catawba River. Its diverse landscape is home to family-friendly towns/cities, a progressive urban region and lakefront communities. We are excited that you want to join our team and recognize that our employees are the foundation for our success. Mission Statement - York County provides quality public services in an open, efficient, and responsive manner. Vision Statement - York County provides an environment where all citizens and businesses can thrive and succeed. About our opportunity York County Fire Services Department is excited to hire a full-time Fire Fabricator/Mechanic to join their team! The purpose of this position is to build/fabricate fire equipment and fire apparatuses, respond to work orders, trouble-shooting electrical, mechanical, and/or fabrication issues, and maintain fire apparatus and/or equipment on a daily basis. Projected Hiring Range: $24.18 - $30.22 per hour. Salary is based on qualifications. Work Schedule: Monday - Friday, 8:00 am -5:00 pm; hours may vary based on operational needs to include occasional evenings and weekends . Our Total Compensation Package: Compensation - competitive market-rate pay, and negotiable based on qualifications Comprehensive State Medical Insurance, Dental and Vision Insurance Life Insurance Long-term disability Deferred Compensation 401K Plans Health Savings Account (HSA) Public Loan Forgiveness Program (Student Loan Forgiveness Program) 11 Paid Holidays + 3 Optional Holidays Longevity Pay SC State Retirement Plan Pension Paid Vacation and Sick Time Sick Bank Critical Care and Cancer Insurance Wellness Screenings Employee Assistance Programs Professional Development / Trainings / Conferences Uniforms and all gear Duties and Responsibilities: Constructs fire apparatus, grass trucks, service trucks out of various metal materials primarily aluminum. Maintains fire equipment and/or apparatus. Trouble shoots electrical, mechanical issues with heavy machinery such as welders, metal shears, metal breaks, torches, fire engines, tankers, service trucks, grass trucks, etc. Receives and processes work orders, ensuring prompt response to both routine and emergency maintenance and repair requests; assists in scheduling tasks according to priority. Ability to drive county vehicles required to perform this required task. Repairs damaged vehicles. Fabricates shelves, exhaust, brackets to mount any device or equipment to an apparatus. Operates MIG, TIG, and ARC welders along with metal shears and a press brake. Pump tests fire engines to make sure they meet NFPA regulations. Maintains burn props for fire training. Makes repairs to building custom props. Uses blueprints or drawing to build, adjust, custom fit, alternate any type of equipment, tools, and fire vehicles. Performs related work as assigned. About you Education and Experience: High School Graduation or GED equivalent. Five (5) years of automotive repair and welding fabrication or an equivalent combination of education, training and experience. Certifications and Licenses: Must possess a valid state Commercial Driver’s License (CDL) Class B driver's license with appropriate endorsements. Class A is desired. Must possess and First Aid / CPR Certification and re-certify prior to expiration. Must possess Forklift Operators certification or the ability to obtain. A welding certification is desirable. Travel and Training: Numerous fire service-related training opportunities will be provided to gain specific manufacturer preferred training opportunities listed and at times may require (up to) air travel and extended stays out of state. Applicants with equivalent experience and/or education may be considered. Physical Demands / Work Environment / Disclaimer Physical Demands: Physical demands refer to the requirements for physical exertion and coordination of limb and body movement. Performs medium work that involves walking, standing, stooping, jumping, lifting, digging, pushing and raising objects and also involves exerting between 20 and 50 pounds of force on a regular and recurring basis and 50 to 100 pounds of force on an occasional basis. Unavoidable Hazards (Work Environment): Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken. Involves routine and frequent exposure to: Bright/dim light; Dusts and pollen. Extreme heat and/or cold; Wet or humid conditions. Extreme noise levels, Animals/wildlife. Vibration; Fumes and/or noxious odors. Traffic; Moving machinery. Electrical shock; Heights. Radiation; Disease/pathogens. Americans with Disabilities Act Compliance: York County is an Equal Opportunity Employer. ADA requires the County to provide reasonable accommodations to qualified persons with disabilities. Prospective and current employees are encouraged to discuss ADA accommodations with management. Standard Clauses: May be required to work nights, weekends, holidays and emergencies (man-made or natural) to meet the business needs of the County. This job description is not designed to cover or contain a comprehensive listing of essential functions and responsibilities that are required of an employee for this job. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Closing Date/Time: 5/24/2024 5:00 PM Eastern
CITY OF ATLANTA, GA
College Park, Georgia, United States
Hourly range: $18.16-$27.21 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
Mar 08, 2024
Full Time
Hourly range: $18.16-$27.21 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024